manualshive.com logo in svg

Piusi DELPHIN PRO X, Quick Manual, Page: 11 / 20

Share
Download
Piusi DELPHIN PRO X Quick Manual Download Page 11

11

/124

11 

/20

EN

This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden. 

delphin PRO_X   QUICK GUIDE

translated from italian

3.2  BATTERY INDICATIONS FOR DC VERSIONS

To recharge the battery, connect the plug of the power cord to the wall 

socket.

The charger automatically starts charging, as follows:

After charging (green LED on steady), unplug the power cord from the 

wall socket.

ATTENTION

Dispensing operations are possible even when the battery is charging.

It is recommended not to disconnect the plug while simultaneously dispens-

ing and charging. 

Wait for the dispensing to finish.

RESET

on/off

STATUS

MADE IN ITALY

RESET

Preset

Not for resale

Flow-Rate

REFILL

3sec

POWER

0,1

1

10

ENTER

   

 AUTO

 FLOW

max

min

DELPHIN PRO

  

X

RESET

on/off

STATUS

MADE IN ITALY

RESET

Preset

Not for resale

Flow-Rate

REFILL

3sec

POWER

0,1

1

10

ENTER

   

 AUTO

 FLOW

max

min

DELPHIN PRO

  

X

RESET

on/off

STATUS

MADE IN ITALY

RESET

Preset

Not for resale

Flow-Rate

REFILL

3sec

POWER

0,1

1

10

ENTER

   

 AUTO

 FLOW

max

min

DELPHIN PRO

  

X

1 - INDICATIONS BATTERY STATUS

[LEDs for battery on steady in charge 

status color]

- If the battery is charged, only the 

GREEN LED will be on steady. Permit-

ted supply.

- If the battery is half charged, only the 

YELLOW LED will be steady. Allowed 

delivery, better recharge the battery.

- If the battery is low, only the RED LED 

will be on. Delivery not allowed.

RESET

on/off

STATUS

MADE IN ITALY

RESET

Preset

Not for resale

Flow-Rate

REFILL

3sec

POWER

0,1

1

10

ENTER

   

 AUTO

 FLOW

max

min

DELPHIN PRO

  

X

RESET

on/off

STATUS

MADE IN ITALY

RESET

Preset

Not for resale

Flow-Rate

REFILL

3sec

POWER

0,1

1

10

ENTER

   

 AUTO

 FLOW

max

min

DELPHIN PRO

  

X

RESET

on/off

STATUS

MADE IN ITALY

RESET

Preset

Not for resale

Flow-Rate

REFILL

3sec

POWER

0,1

1

10

ENTER

   

 AUTO

 FLOW

max

min

DELPHIN PRO

  

X

1

2

3

+

1

2

3

2 - BATTERY IN RECHARGE

[LEDs for alternating flashing battery - 

1-RED / 2-YELLOW / 3-GREEN]

The battery is charging

Summary of Contents for DELPHIN PRO X





















Reviews:

No comments