Page 8
For technical questions, please call 1-888-866-5797.
Item 63397
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
cleaning, Maintenance, and Lubrication
procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO pREVENT SERIOUS INJURy FROM TOOL FAILURE: Do not use damaged equipment.
If abnormal noise or vibration occurs, have the problem corrected before further use.
1. Before each use, inspect the general condition of
the Lift. Check for broken, cracked, or bent parts,
loose or missing parts, and any condition that may
affect the proper operation of the product. If a
problem occurs, have the problem corrected before
further use.
Do not use damaged equipment.
2. Before each use, thoroughly test the Lift
for proper operation prior to its actual use.
If the Lift appears not to be working properly,
follow
Bleeding on page 5
.
3. Change the hydraulic oil at least
once every three years:
a. With the Lift fully lowered, remove the Oil Fill
Screw on the side of the Cylinder Assembly.
b. With assistance, place the Lift on its side to allow
the old hydraulic oil to drain out of the jack’s Oil
Reservoir completely, and dispose of the old
hydraulic oil in accordance with local regulations.
c. With the Lift upright, completely fill the
jack’s Oil Reservoir with a high quality
hydraulic oil (sold separately) until the oil
just begins to run out of the oil fill hole.
d. Reinstall the Oil Fill Screw.
4. Wipe dry with a clean cloth. Then, store the
Lift in a safe, dry location out of reach of
children and other non-authorized people.
