Page 3
For technical questions, please call 1-888-866-5797.
Item 56368 56371
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Post
Base
Pawl
(not shown)
Handle
1. Take a
Post
and face the ratchet
edge toward the front of the
Base
.
The
Pawl
is on the front.
2. Lift the
Handle
and lower the
Post
into the
Base
. Make sure
it is completely lowered.
CAUTION!
Be alert to pinching
danger when lowering the
Post.
3. On the opposite side of the
Handle
there is a tab on the
Base
.
Using a small punch and hammer
(sold separately), bend the tab in.
Bend the tab in enough to keep the
Post
from coming out of the
Base
.
Tab
WARNING!
Before using the Jack
Stands, make sure the
Post
cannot
be pulled up and out of the
Base
.
4. Repeat Steps 1 through 3 above
with the other Jack Stand.
