Page 3
For technical questions, please call 1-888-866-5797.
Item 69886
ASSEMBLY INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Middle
Beam (20)
Rear
Beam (23)
Column (5)
Bolt (22)
Lock
Washer (21)
a
a
b
b
Figure A: Attaching Column
to Rear and Middle Beams
1. To attach the Column to the
Rear and Middle Beams:
a. Insert Middle Beam (20) into
the receiver at the bottom
of the Column (5).
b. Place Rear Beam (23) against
the Column. Align the holes in
all three parts and secure with a
Bolt (22) and Lock Washer (21).
Middle
Beam (20)
Front
Beam (11)
Nut (14)
Washer (13)
Bolt (12)
Figure B: Attach Front Beam
2. Use Bolts (12), Washers (13), and
Nuts (14) to attach the Front Beam (11)
to the Middle Beam (20), with the
brackets on the bottom as shown.
Wheel (24)
Washer (25)
Snap
Ring (26)
Caster (19)
Bolt (15)
Washer (16)
Lock
Washer (17)
Nut (18)
Figure C: Attach Wheels and Casters
3. Attach Casters (19) to the
Front Beam (11) using Bolts (15),
Washers (16), Lock Washers (17),
and Nuts (18).
4. Slide Wheel (24) onto each axle
at end of Rear Beam (23). Then
slide Washer (25) and secure
with a Snap Ring (26).
