Page 5
For technical questions, please call 1-888-866-5797.
Item 63725
Installing a Ball Joint
1. Mount Remover/Installer (13) on
Forcing Screw assembly so that the
larger diameter portion of Remover/
Installer faces the threaded hole of
C-Frame and smaller diameter portion
faces the unthreaded side of ball joint.
2. Place mounted Remover/Installer
on unthreaded side of ball joint.
3. Align mounted Remover/
Installer, ball joint, and proper
size Receiver Tube (1-6, 10-11)
to allow installation of ball joint.
4. Using a wrench, turn Forcing
Screw assembly clockwise
to install the ball joint.
Maintenance and Servicing
1.
Before each use,
inspect general
condition of tool. Check for
misalignment or binding of moving
parts, cracked or broken parts,
and any other condition that may
affect its safe operation.
Do not
use damaged equipment.
2.
After use,
clean external surfaces.
Then dry and lubricate all moving
parts. Do not use solvents.
3.
When storing,
keep Ball Joint
Adapter Set and its accessories
in its Carrying Case and store
in a clean, dry, safe location.
4.
CAUTION!
All maintenance, service,
and repairs not mentioned in this
manual must only be performed by
a qualified service technician.
