Page 3
For technical questions, please call 1-888-866-5797.
Item 63725
8. Store this product out of the reach
of children and do not allow people
unfamiliar with the product or these
instructions to operate the product.
This product could be dangerous
in the hands of untrained users.
9. Maintain this product. Check for
misalignment or binding of parts,
breakage of parts and any other
condition that may affect the
product’s operation. If damaged,
have this product repaired before
use. Many accidents are caused
by poorly maintained equipment.
10. Use this product in accordance with
these instructions and in the manner
intended for this particular type of
product, taking into account the
working conditions and the work to
be performed. Use of this product for
operations different from those intended
could result in a hazardous situation.
11. Maintain labels and nameplates
on the Adapter Set. These carry
important safety information. If
unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. Wear ANSI-approved safety
goggles and heavy duty work
gloves when using this product.
13. Prior to servicing a vehicle,
turn off
the vehicle’s engine
and refer to
the vehicle manufacturer’s service
and repair manual for instructions
on how to safely secure the vehicle
in place with jacks, stands, etc.
14. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and
caution are factors which cannot
be built into this product, but must
be supplied by the operator.
Operating Instructions
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of
this document including all
text under subheadings therein
before set up or use of
this product
.
Attaching Plug Bolt to C-Frame
1.
NOTE:
This set is recommended
for use with
4065 4-Wheel Drive
Ball Joint Service Kit
, which is also
available from Harbor Freight Tools.
2. The illustration in Figure A below
depicts a disassembled C-Frame, a
tool that is part of 4065 Service Kit.
3. To operate Master Ball Joint Adapter
Set, attach the Plug Bolt (part 14)
to the C-Frame from 4065.
4. To do so, unscrew and remove
the Forcing Screw, Steel Ball,
and O-Ring from the C-Frame.
Steel Ball / O-Ring
(not included)
Forcing
Screw
(not included)
Plug Bolt (14)
C-Frame
(Part of 4065)
Figure A
