Page 2
For technical questions, please call 1-888-866-5797.
Item 60395
S
AFET
y
O
PERA
TION
M
AINTENAN
c
E
A
SSEM
b
Ly
Specifications
Rated Capacity
300 lb.
Maximum Lift Height
24"
Axle Width
36" - 50"
Wheel Bracket Size
11" W x 5-13" L
Patent Pending
IMPORTANT SAFETy INFORMATION
Failure to heed these warnings may result in personal injury and/or property damage:
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
Use Precautions
1. Study, understand, and follow all instructions
before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces.
4. Center load on Jack platforms.
5. Lift only using tires.
6. Immediately after lifting load, ensure Jack
mechanical load holding means is engaged.
7. Do not move while loaded.
8. Secure load with appropriate restraint device.
9. Do not adjust safety valve.
10. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
11. Keep clear of load while lifting and lowering.
12. Lower load slowly.
13. Do not use for aircraft purposes.
14. Inspect before every use; do not use
if parts loose or damaged.
15. Keep your work area clean and well lit.
Cluttered work areas invite accidents.
16. Do not allow anyone on the vehicle while
using the Jack. Keep bystanders a safe
distance away from the vehicle and Jack.
17. Stay alert. Watch what you are doing, and
use common sense when operating a Jack.
Do not use a Jack while tired or under the
influence of drugs, alcohol, or medication. A
moment of inattention while operating Jacks
may result in serious personal injury.
18. Store idle Jacks out of reach of
children and other untrained persons.
Jacks are dangerous in the hands
of untrained users.
19. Jack service must be performed
only by qualified repair personnel.
Service or maintenance performed by
unqualified personnel could result in a risk of injury.
20. When servicing a jack, use only identical
replacement parts. Follow instructions in
the “Inspection, Maintenance, And Cleaning”
section of this manual. Use of unauthorized
parts or failure to follow maintenance
instructions may create a risk of injury.
21. Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
22. Before use, read manufacturer’s instruction
manual for the vehicle you will lift.
23. Do not support both ends of the
vehicle at the same time.
24. Before lowering the Jack, remove all tools
and equipment from under the vehicle.
25. The warnings, precautions, and instructions
discussed in this manual cannot cover all
possible conditions and situations that may occur.
The operator must understand that common sense
and caution are factors, which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUcTIONS.
