PITSOS GHB1220B, User Manual, Page: 19 / 22

19
Product Recommended speed Processing time
double disc –
pureeing
potatoes
350 g 15
10 – 15 secs
apples 10 – 15 secs
onions 10 – 15 secs
carrots 20 – 25 secs
beetroots 10 – 15 secs
OPERATION WITH ICE CRUSHER
The appliance characteristics
Hand blender is equipped with ice crusher which is used for
crushing ice and i.e. frozen fruits.
You can use the crusher only with the container
and lid of mini food processor!
Application of the accessories
Double-sided disc – is used for crushing, grinding ice and
frozen products. The disc is round, the blades are double-
sided. One side, which we recognize by the applied plastic
fifteen- pointed star, fig. 14A is used for first level grinding
„I” (smaller particles of grinded product), the other side is
used for second level grinding „II” (bigger particles of grinded
product) and it is marked with seven-pointed star fig 14B.
Spindle – is used for fixing the disc.
Preparation of the ice-crusher
Before assembling and disassembling blender
motor drive On the ice crusher, make sure if
the supply cord plug is disconnected from the
mains supply outlet.
Wash the parts in contact with processed product before
first usage.
Operate the blender so, that the closed/open markings
located on the appliance are well visible.
Operation with ice crusher
1 Place the container of the mini food processor on firm,
flat and dry surface.
2 Place the disc for ice on the spindle (double – sided disc),
so that the blades provided for operation are on the top.
3 Place the disc with the spindle inside the mini food
processor container so that the pivot protruding from the
container is inserted into the spindle orifice.
4 Insert the ice crusher container on the fasteners of the
mini food processor. Then lock the crusher container, turning
it until you can feel it is blocked.
5 Place the processed products inside the container not
exceeding MAX level.
When you fill up the crusher container (13) with appropriate
amount of processed product (do not exceed MAX level)
center the spindle (15) (put in the middle) to enable its
proper coupling with the mini food processor lid (9).
H
6 Insert the mini food processor lid including the gearbox
into the fasteners of the ice crusher container. Then lock the
lid turning it until you feel it is blocked.
7 Insert the blender drive on such assembled ice
crusher .
8 Lock the blender drive .
9 Connect the plug into the mains supply outlet.
10 Start-up the appliance pressing TURBO switch of the
blender motor drive.
●
After operation, switch off the appliance and unplug it
from the socket.
●
Disassembling the ice crusher, proceed reverse to its
assembling.
The ice crusher blades are very sharp. Be very
careful during assembling, disassembling or
during cleaning.
Never exceed the maximum level of the ice
crusher input.
Never disassemble the lid from the container
before the disc stops rotating.
During operation of the drive of the blender with the ice
crusher use TURBO function.
Operational tips
●
Maximum level of input of the ice crusher container
corresponds with the capacity of 450 ml.
●
Shake the appliance in case the products are clogged
over the disc.
●
In case the products get stuck to the inner wall of the
mini food processor container hindering or blocking
ejection of grinded product out of the upper container of
the ice crusher:
–
Switch off the appliance.
–
Remove the drive with the lid and container of ice or
other products crusher.
–
Remove the products out of the mini food processor
walls.
–
Re-assemble the appliance – as defined above,
Continue the operation.