16
Preparing the blender to use
Before first use, wash all parts of the appliance
that come in contact with food in warm soapy
water.
USING METALL SHAFT
Hand blender with the metall shaft can be used for home
cooking, preparing foodstuffs for children and drinks. It is
especially recommended for pureeing cooked and raw
vegetables, soft fruit (with no stones), mixing up different
beverages or preparing dips, sauces, soups or other soft-
textured foods.
Before assembling on and removing the
attachment, make sure, that the plug of the
supplying cord is disconnected from the mains
supply outlet.
1
Fill up the beaker, no more than the MAX level.
2
Attach metall shaft to drive shaft, align them in the position
according to the indicators on the cover of the drive shaft and
the coupling. Then twist the drive shaft clockwise (the direction
is shown by the arrow) until you hear that it has clicked (the
indicator on the coupling should be in a closed position.
3
Plug the power cord to the power supply socket.
4
Plunge the coupling in the products to be mixed.
5
Then start – up the appliance pressing the
(2)
switch and
set the required gear as necessary.
The appliance operates only with the “power”
or “turbo” button pressed.
●
When finished, turn the appliance off and unplug it by
disconnecting the cable cord from the power outlet.
Operational guidelines
●
To detach the metall shaft, just follow the attaching
procedure in reverse order.
●
Wash the metall shaft by swishing it in clean, warm water.
●
If any fluid gets inside the blender attachment, turn it and
put with the blade up until it is dry.
Included in the set you will find a special
beaker with a handle for mixing, which is easy
and helpful to operate with. Other jars may be
used as well.
USING WHISK ATTACHMENT
Hand blender with the whisk attachment purees soups,
whips up your favourite smoothies, mayonnaise or creams
and toppings for waffles and desserts, as well as rubs egg
yoke with sugar or prepares dough for pancakes.
Before assembling on and removing the whisk,
make sure, that the plug of the supplying cord
is disconnected from the socket.
B
F
1
Before operation insert the whisk into the gearbox.
2
Such assembled attachment attach to the drive shaft,
align them in the position according to the indicators on the
cover of the drive shaft and the whisk attachment. Then
twist the drive shaft clockwise (the direction is shown by the
arrow) until you hear that it has clicked (the indicator on the
coupling should be in a closed position).
3
Plug the power cord to the power supply socket.
4
Plunge the end of the whisk inside the beaker into products.
5
Then start – up the appliance pressing the switch
(2)
and
set the required gear as necessary.
The appliance operates only with the “power”
or “turbo” button pressed.
●
When finished, turn the appliance off and unplug it by
disconnecting the cable cord from the power outlet.
Operational guidelines
●
To detach the whisk attachment, just follow the attaching
procedure in reverse order.
●
For best results operate the appliance at high gear –
15th speed setting.
●
When finished, turn the appliance off and unplug it by
disconnecting the cable cord from the power outlet.
●
You can also use the mixing container included with the
blender.
To obtain better results lean the whisk is
a small angle and make round movements with
it inside the bowl.
The level of products placed in a bowl should
not exceed the height of the workspace of the
beater (L).
3 cm
L
OPERATING THE MINI FOOD PROCESSOR
Hand blender is equipped with a mini food processor used to
chop meat, cheese, nuts, onions, garlic, carrots, and prunes.
Before assembling on and removing the
blender drive out of the mini food processor,
make sure that the plug of the supplying cord
is disconnected from the mains supply outlet.
Operate the blender so, that the closed/open marking
located on the appliance are well visible.
●
Before each usage of the mini food processor knife,
remove the cover out of the blades.
1
Place the blade into the work bowl so that its hole
matches the tang inside.
C
Summary of Contents for GHB1220B
