4. Place eight pipes firmly into the receptacles of the
connectors on the middle band.
• Components needed:
•
8 pipes
5. Using a ladder, connect the pipes to make the
square top band. Firmly attach the corners using
three-way elbow connectors. Connect the pipes of
two opposite sides using T connectors. Connect the
pipes of the other two opposite sides using four-way
corner connectors.
• Components needed:
•
4 three-way elbow connectors
•
2 T connectors
•
4 four-way corner connectors
•
8 pipes
6. Use two pipes and a coupler to create a brace
between the two four-way corner connectors on
the top section. Note: The frame might feel a little
wobbly at this point. It will become more stable after
the netting is added and tension is increased.
• Components needed:
•
2 pipes
•
1 coupler
Three-way
elbow
connectors
Four-way
corner
connectors
T connectors
Drone Arena User Guide
4
