Operator Guide
SV61322 Rev. C
What the Stacker LEDs Mean
LED
DI380/425/500/600
DI900/950
No Light
No power to stacker.
No power to stacker.
Green On
Normal operation.
No error. Normal Operation.
Green Blinking Stacker almost full;
remove stack.
Not applicable.
Amber
Not applicable.
Stacker almost full. Remove
stack.
Red Blinking
Stacker full; remove stack Not applicable.
Red On
Press reset switch to clear
error condition
Error. Correct error
condition. See page 11.
Red - 2 Blinks
Transport jam; remove
stalled piece and press
reset switch or Start key
on inserter
Not applicable.
Red- 3 Blinks
Cover open or stacker
pulled away from inserter;
close cover or slide
stacker into place. Press
reset switch or inserter
Start key.
Not applicable.
Red - 4 Blinks
Stacker error; remove
stalled piece if present
and press reset switch or
inserter Start key.
Not applicable.
Red - 5 Blinks
Troubleshooting
Stacker
LED
Stacker Error Messages Displayed by DI500/DI600 Inserter
Error Message
Solution
Additional Comments
E196 — Power
Stacker Obstruction
Empty stacker and
check for obstruc-
tions. Press Clear
Deck to continue.
NOTE:
Clearing
deck may feed un-
inserted material to
stacker. Remove
material
before
re-
starting.
Clear obstructions in stacker
entry area. You may have to
pull the stacker away from
the inserter to clear the stall.
Pressing Clear Deck clears
both the inserter and resets
the stacker. The inserter
display goes back to its home
ready screen. Press Start to
continue.
