manualshive.com logo in svg

Pitney Bowes ADDRESSRIGHT DA700, Operator'S Manual

Share
Download
Pitney Bowes ADDRESSRIGHT DA700 Operator'S Manual Download Page 98

A-14 

 SV61027 Rev. D

Appendix A • Control Panel Menus

3.  Font Selection 

(continued)

E.  Italic

Italic characters have decreased stroke weight, print at an 

oblique angle and print somewhat lighter than standard or 

bold typefaces. Use italic to provide emphasis and add flair 

to address text that requires a finished, polished appear-

ance. 

F.  Outline

Use this option to print only the outline or the edge of the 

font’s shape. All records printed using Outline will appear as 

hollow text.

To select the font options:

1.  Press the + or – buttons to scroll through the Main Menu 

options until the Font option appears on the LCD panel.

2.  Press the + or – buttons to scroll through the Font op-

tions until the desired option appears on the LCD panel.

3.  Press the Enter button to select the desired option (A, B, 

C, D, E or F).

4.   After you’ve made your selections, press the Menu but-

ton several times to back out of the Menu until the printer 

displays OFF LINE.  Then, press the ON LINE button to 

enable the printer.

Summary of Contents for ADDRESSRIGHT DA700













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands