Solstice I12 Water Cooker Computer Service
Part #60153301
L20-316 Rev 0
4
light. When all cooks are done, Hold times will be displayed in similar fashion, that is, least time
remaining.
1.4
To cancel a Cook or Hold:
To cancel a running cook or hold, press and hold any key with a lit indicator. Display will momentarily
display time and product, and then prompt for cancellation with the display of [2C mm:ss] [CANCEL ].
Release the button immediately if you do not wish to cancel this product. Continuing to hold the button
will cancel the timer.
If no other cooks or hold times are running, controller displays will return to [READY] or [HEATING].
1.5
To check Actual and Set temperatures:
To view the actual vat temperature, press the thermometer key
.
The display will show [
ACT
tttF] or [
ACT
tttC], where ttt is the current vat temperature. After a few
moments, the display will return to [nnC hh:mm] [product name] or [nnC mm:ss] [product name] when
cooks or holds are still running. If no cooks or holds are running, then [READY] or [HEATING] is
displayed.
To view the set temperature, press the thermometer key twice
+
.
The display will show [
SET
tttF] or [
SET
tttC], where ttt is the current set temperature. After a few
moments, the display will return to [nnC hh:mm] [product name] or [nnC mm:ss] [product name] when
cooks or holds are still running. If no cooks or holds are running, then [READY] or [HEATING] is
displayed.
1.6
To View Current Settings for a Product Key:
To view the current settings for any product key, press the clock key
, followed by the desired
product key
SHRIMP
.
The display will momentarily show the settings for Cook, Shake, Hold, and Hold Pre-Alarm for this
product. The display will show the current settings for times in either [mm:ss, or h.mm:ss] for this
product key. After a few moments, the display will return to [nnC h.h:mm] [product name] or [nnH
mm:ss] [product name] when cooks or holds are still running.
If no cooks are running, then [READY] or [HEATING] is displayed.
1.6.1
Typical displays using the above key 4 as an example:
Key 4 has been named SHRIMP9.
Cook
time is set for 5
minutes and 30 seconds.
Shake
time is set for 4 minutes and 15 seconds. Any
time set here is an alarm before the end of the Cook.
Hold
time for this product is set for 2 hours, 30 minutes.
Hold Pre-alarm
is disabled by a setting of zero. Any
time set here is an alarm before the end of the Hold
period.
Food Safe Temperature Limit
is disabled by a setting
of zero, the factory default. Temperatures set here
define the lower safe cooking temperature for a product
key.
In a few moments, the display will return to [READY].