ASSEMBLING & MOUNTING THE CART
…
CON’T
Step 2 Install Bottom Shelf Assembly:
Models 820FB—Open Shelf Model 820Deluxe—Solid Shelf
Install the Bottom Shelf to all four legs.
Using 4 of the 1/4” x #20 x 3/5” screws (AA) and your
Screw driver, hand start then secure the screws firmly to
the leg frame.
Note: Ensure the shelf is installed so the flat surface is facing up
NOW, securely tighten ALL 16 leg screws (AA)
Page 8
Step 3 Install Wheels to Leg Assembly:
Slide metal wheel onto either leg with the
axle
Install washer (CC), then hand screw the
7/16” x 20 Nut (BB) onto the threaded
axle. Use your wrench to tighten.
Spin each wheel to ensure the wheels
turn
freely.
Carefully lift barrel and attached leg
assembly to the upright position.
Parts Needed:
ASSEMBLING—LID STOPPER
Installation Steps
Step 1 Attach Lid Stopper
Slip the Lid Stopper front lip into the slot provided
Located at the top of the barrel in the middle.
Using the screw driver, secure the Lid Stopper
to the barrel with one 1/4” - #20 x 3/5” (AA) screw.
Take care not to over-tighten.
Hardware Required:
Section One: ASSEMBLY INSTRUCTIONS
Screw 1/4”- 20* 3/5” x 1 (AA)
