5
EN
ENGLISH
2. MOUNTING THE CART PANELS
Parts Required:
1 x Cart Side Panel - Left (#13)
1 x Cart Partition (#14)
1 x Cart Side Panel - Right (#15)
1 x Cart Back Panel (#16)
1 x Cart Front Panel (#21)
26 x Screw (#A)
Installation:
• Install the Cart Side Panel Left to the Cart Bottom using five screws.
Repeat the same installation for the Cart Side Panel Right using another
five screws. Note illustration 2A.
NOTE: To ensure the Cart Side Panels are arranged correctly, verify
that the Cart Side Panel Left has two holes facing the front for the
bottle opener installation in future steps.
• Place the Cart Back Panel between the Cart Side Panels, flat side facing
outward. Secure using three screws into each Cart Side Panel. Note
illustration 2B.
NOTE: Once installed, the exterior of the cart should be flush with
the Cart Bottom.
• Position the Cart Partition on the Cart Bottom as shown. Note the
position of the mounting holes and that the edge facing the front has
no holes. Secure the Cart Partition by using three screws into the Cart
Bottom and two screws into the Cart Back Panel. Note illustration 2C.
• Align the holes of the Cart Front Panel and the Cart Partition, then
secure using on screws. Next, secure the Cart Front Panel into the Cart
Side Panels using two screws on each side. Note illustration 2D.
2A
2B
2C
2D
15
16
13
A
A
14
21
A
A
A
