![Pit Boss 10558 Assembly And Operation Manual Download Page 13](http://html1.mh-extra.com/html/pit-boss/10558/10558_assembly-and-operation-manual_1559208013.webp)
13
FIRST USE – GRIDDLE BURN-OFF
Before using your griddle for the first time with food, it is important to complete a
burn-off. Start the griddle and operate for a minimum of 15 minutes on HIGH to burn-
off the unit. This will “heat clean” the internal components, dissipate odors and rid it of
any foreign matter.
LIGHTING PROCEDURE
1. Verify that the control knob is turned to the OFF position.
2. Connect LP gas cylinder as per instructions. Turn LP gas tank valve to OPEN.
3. Note the indicator marker on the control knob. Push and hold down the control
knob on the griddle and turn 90 degrees (or 1/4) counter-clockwise SLOWLY (2 to
3 seconds) to HIGH. You should hear a
"click" sound to indicate a spark from the
igniter, and look for flame to ensure the burner is lit. If it does not, repeat up to
three times.
4. If ignition does not occur in 5 seconds, turn the control knob to OFF, wait 5 minutes
and repeat lighting procedure. If the above points do not work, follow
Manual
Lighting Procedure
instructions
.
5. After the burner has caught fire, you are ready to enjoy your griddle at your desired
temperature!
If the burner goes out during operation, turn the control knob to
the OFF position. Wait five minutes before attempting to relight to
allow any accumulated gas to dissipate.
IGNITER FAILURE PROCEDURE
If for any reason your igniter fails after three of four attempts, check the
following steps, or start your griddle using the manual method.
1. Ensure the regulator knob is turned to the OFF position. Allow any
accumulated gas to dissipate.
2. After five minutes, check the following:
•
Visually confirm that the igniter is working by pushing the control
knob and looking at the igniter tip for a spark. If no spark, adjust
the distance between the igniter (electrode) tip and burner to
4.5 mm (3/16 in).
•
Visually confirm that the burner tube and portholes are not
obstructed. If blocked, follow
Care & Maintenance
instructions
.
3. If the above points do not work, follow
Troubleshooting
instructions
.
Summary of Contents for 10558
Page 23: ......