Pisector GSM-06 User Manual Download Page 11

Page: 11 / 67

3.2.

Adding Remote Controller

This system supports maximum 8 remote controllers ( 2 free remote

controllers come with PiSECTOR Alarm System package have been

coded). All extra remote controllers have to be coded with the main unit

panel in order to perform correctly. Their code cannot be empty or the

same as those already saved in the main unit panel.

Method: enter remote controller setting menu, press “4” or “6” to choose

remote controller serial number, press “8” to find “Coding” and then

press ENTER to confirm. Trigger the remote controller you want to add,

the main unit panel will make two beeps after receiving it. And then

press ENTER to confirm. If the remote controller has been saved before,

after triggering it, the main unit panel will make four beeps and LCD

screen display “Error, Repeated code”.

Summary of Contents for GSM-06




































































Search results

Summary of Contents for GSM-06

Reviews:

Related manuals for GSM-06

Brands by name

Popular brands

Pisector GSM-06, User Manual

Search results

Summary of Contents for GSM-06

Reviews:

Related manuals for GSM-06

Brands by name

Popular brands