Piscine Solide COSTA DEL SOL, Installation Manual

Page: 54 / 75

3-6 No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL WALL
Section
3
B. CONT. ASSEMBLING THE COVE
e. A vacuum cleaner can later be used to remove
the air from between the liner and the wall. This
technique enables you to remove folds in the liner.
However the following precautions should be taken:
Do not use an industrial vacuum cleaner which
could be too powerful.
Tape the end of the vacuum hose before inserting it
into the wall so as not to damage the liner.
Insert the nozzle until it is about 4” (10cm) above
the cove (insert through the water return outlet or
the skimmer depending on the diameter of your
hose). Make sure you will be able to remove the
hose later on.
Tape the hose to the wall.
(Image 14)
f. Close the skimmer opening with cardboard and ad-
hesive tape so that the suction of air works better..
(Image 15)
14
15