Page 15 of 23
17.1 Cleaning Filters
Important Note
– the Filters must be cleaned regularly for best suction
performance and to prevent over-heating and damage to your vacuum
cleaner.
Cleaning is best done at the same time when emptying the dust Canister
after you have finish vacuuming for the day.
NOTE
: Never use the vacuum cleaner with wet or damp filters or without
ALL filters fitted.
Using wet or damp filters will damage the filters, may cause serious
damage to the vacuum cleaner and will void your warranty.
17.1.1 Foam Filter
•
Remove the filter assembly as described
previously.
•
Remove the foam filter from the plastic
frame.
•
Wash the foam filter in warm mild soapy water, rinse in clean fresh cold
water and let completely dry.
•
Note: Only clean the white filter (part of the frame) if it is very dirty,
otherwise just tap the edge of the filter on a hard surface to dislodge any
dust and remove any large debris.
•
If washing, wash the filter in warm mild soapy water, rinse in clean fresh
cold water and let completely dry.
DO NOT
scrub the filters or place in a dishwasher.
DO NOT
use a hair drier to dry the filters.
NOTE
: Never use the vacuum cleaner with wet or damp filters. Using wet
or damp filters will damage the filters, may cause serious damage to the
vacuum cleaner and will void your warranty.
•
Refit the Filters (or replace with new ones) in the reverse method used for
disassembly.
