Page 8 of 14
9
Floor Head
The floor head is adjustable to suit either hard floors or carpets.
Press the lever down to Extend the brush
Press the other lever down to Retract the brush
•
Hard Floors – Extend Brush
Laminate flooring, tiles, vinyl etc.
•
Carpet – Retract Brush
Long and short pile carpets, runners etc
9.1
Floor Head Parking
There are two locations where the floor head can be hooked for storage.
On the Back and Underneath
10 Safety Device Operation
NOTE
: The vacuum has an overheating protection device.
It will automatically switch off power to the motor if it overheats. eg. from
blocked nozzles, full dust container or unclean filters.
If this happens, turn off the vacuum and unplug from power socket, clean
blockage and / or filters and allow to rest for at least 45 minutes which should
be enough time for the motor to cool down.
Note
: If the over-temperature device activates and turns the motor off, and
you do not unplug the appliance from the power point, the motor will restart
automatically after it has cooled down enough to reset the safety device.