Piranha Optional Tooling and Attachments
Enhance your Piranha’s versatility!
Pressbrake Tooling Holders
•
Allows you to use pressbrake punches and
dies in your ironworker for higher precision
bending.
Roller Feed Tables
•
Available in 5' lengths.
•
Includes rollers for angle and flat bar sections.
•
20
” wide flat rollers and 6” angles.
Channel Die Block
•
Enables you to punch into the legs of channel
and other structural shapes.
•
Mounts in place of your standard die block.
•
Still utilizes your urethane punch attachment.
•
Can be used in conjunction with offset dies to
punch very near to the web of your material.
***Additional Options Shown on Inside of Front Cover***
Channel Shear
•
Attaches to the punch end of the machine.
•
Removes a 1/2" slug for each cut.
•
Slug must be slid out the front of the channel
shear after each cut.
•
A pinned slide block is adjusted to
accommodate different widths of channel.
Summary of Contents for P65
