AIRCRAFT OPERATING INSTRUCTIONS – VIRUS 912 S-LSA GLIDER
Page
24
Bolts: fastened
Landing gear strut: no mechanical damage (e.g. cracks), clean
Wheel: no mechanical damage (e.g. cracks), clean
Wheel axle and nut: fastened
Oil line (hydraulic brakes): no mechanical damage and/or leakage
Tire: no cracks, adequate pressure
Wheel fairing: undamaged, firmly attached, clean (e.g. no mud or grass on the inside)
Wings’ leading edge
Surface condition: pristine, no cracks, impact spots, no paint and/or edge separations
Pitot tube: firmly attached, no mechanical damage or bending. Remove protection cover
and make sure it is not blocked or full of water.
Wing drain holes: make sure they are not blocked and clean accordingly.
Wingtip, lights
Surface condition: pristine, no cracks, impact spots or bumps, no paint separations
Wings’ trailing edge
Surface condition: pristine, no cracks, impact spots, no paint and/or edge separations
