The basic empty weight and C.G. location are recorded in the Weight
and Balance Data Form (Figure 6-7) and the Weight and Balance Record
(Figure 6-9). The current values should always be used. Whenever new
equipment is added or any modification work is done, the mechanic
responsible for the work is required to compute a new basic empty weight
and C.G. position and to write these in the Aircraft Log Book and the
Weight and Balance Record. The owner should make sure that it is done.
A weight and balance calculation is necessary in determining how much
fuel or baggage can be boarded and still remain within allowable limits.
Check calculations prior to adding fuel to insure against improper loading.
The following pages are forms used in weighing an airplane in
production and in computing basic empty weight, C.G. position,
and useful load. Note that the useful load includes usable fuel, baggage,
cargo and passengers. Following this is the method for computing takeoff
weight and C.G.
6.3 AIRPLANE WEIGHING PROCEDURE
At the time of licensing, Piper Aircraft Corporation provides each
airplane with the basic empty weight and center of gravity location. This
data is supplied by Figure 6-7.
The removal or addition of equipment or airplane modifications can
affect the basic empty weight and center of gravity. The following is a
weighing procedure to determine this basic empty weight and center of
gravity location:
(a) Preparation
(1) Be certain that all items checked in the airplane equipment
list are installed in the proper location in the airplane.
(2) Remove excessive dirt, grease, moisture, foreign items
such as rags and tools from the airplane before weighing.
(3) Defuel airplane. Then open all fuel drains until all re-
maining fuel is drained. Operate engine on each tank until
all undrainable fuel is used and engine stops.
SECTION 6
PIPER AIRCRAFT CORPORATION
WEIGHT AND BALANCE
PA-38-112, TOMAHAWK
REPORT: 2126
ISSUED: JANUARY 20, 1978
6-2
REVISED: MAY 10, 1982
The basic empty weight and C.G. location are recorded in the Weight
and Balance Data Form (Figure 6-7) and the Weight and Balance Record
(Figure 6-9). The current values should always be used. Whenever new
equipment is added or any modification work is done, the mechanic
responsible for the work is required to compute a new basic empty weight
and C.G. position and to write these in the Aircraft Log Book and the
Weight and Balance Record. The owner should make sure that it is done.
A weight and balance calculation is necessary in determining how much
fuel or baggage can be boarded and still remain within allowable limits.
Check calculations prior to adding fuel to insure against improper loading.
The following pages are forms used in weighing an airplane in
production and in computing basic empty weight, C.G. position,
and useful load. Note that the useful load includes usable fuel, baggage,
cargo and passengers. Following this is the method for computing takeoff
weight and C.G.
6.3 AIRPLANE WEIGHING PROCEDURE
At the time of licensing, Piper Aircraft Corporation provides each
airplane with the basic empty weight and center of gravity location. This
data is supplied by Figure 6-7.
The removal or addition of equipment or airplane modifications can
affect the basic empty weight and center of gravity. The following is a
weighing procedure to determine this basic empty weight and center of
gravity location:
(a) Preparation
(1) Be certain that all items checked in the airplane equipment
list are installed in the proper location in the airplane.
(2) Remove excessive dirt, grease, moisture, foreign items
such as rags and tools from the airplane before weighing.
(3) Defuel airplane. Then open all fuel drains until all re-
maining fuel is drained. Operate engine on each tank until
all undrainable fuel is used and engine stops.
SECTION 6
PIPER AIRCRAFT CORPORATION
WEIGHT AND BALANCE
PA-38-112, TOMAHAWK
REPORT: 2126
ISSUED: JANUARY 20, 1978
6-2
REVISED: MAY 10, 1982
