Piper PA-28 Cherokee 140, User Manual, Page: 25 / 27

Cowl
Collect these parts:
ÿ 5 ­ Wood Blocks
ÿ 5 – Small Wood Screws
Make the necessary cut­outs in the cowl for the engine you
have chosen. Slide the Cowl on the Fuselage so the Prop Shaft
exits the center of the Cowl opening and mark the edge of the
Cowl on the Fuselage. We suggest using Masking Tape.
Glue 5 Wooden Blocks around the perimeter of the Engine
Firewall, out to the edge of the Fuselage. Roughen the firewall so
the Epoxy Glue bonds better.
Cut 5 pieces of stiff Card Stock 1 inch x 4 inches and tape
them on the Fuselage so that the ends overlap the center of
each Wooden Block and mark that location on the Card
Stock.
Page 23