24
POLYCOTE ECS
is a proprietary Enhanced Covering System engineered in Canada and available only from VMAR.
With POLYCOTE ECS the graphics are inside the covering... not stuck on top. No Decals! No Layers! No Strips!
No Stripes! POLYCOTE ECS utilizes ULTRA TOUGH polyester and our SURE SEAL system to ensure that the
seams stay down! Best of all POLYCOTE is totally fuel proof! Quite simply...
POLYCOTE ECS leads the pack in ARF covering systems!
CARE & CLEANING OF POLYCOTE ECS.
CARE:
Avoid leaving your model in a closed car exposed to direct heating from the sun for lengthy periods.
Temperatures under such conditions can exceed 50C (122F) and sagging may occur.
TIGHTENING:
To tighten POLYCOTE ECS we recommend using a hobby heat gun set for medium heat and a soft
cloth. We do NOT recommend an iron. Practise on the bottom of a les noticable section first. On open bays, heat
and then let cool. On solid surfaces, heat andthen lock down by rubbing.
RESEALING SEAMS:
POLYCOTE ECS seams are sealed with our SURE SEAL system and will not normally fift.
If you find a loose edge, clean any oil residue from the area and reseal with thin CA.
PATCHING:
If you should puncture POLYCOTE ECS, clean any oil residue from the area of the paper. Patch with
low temperature covering using a heat gun and soft cloth. See Tightening tips above.
CLEANING:
To clean POLYCOTE ECS we recommend Fantastic household cleaner and disposable paper towels.
You can use just about any cleaner and we are not aware of any cleaner that will damage POLYCOTE but it is a
good idea to always test a small out of the way spot first. Wipe along seams, not acroos.
VMAR, POLYCOTE and VMAX are Trademarks of VMAR Manufacturing and appointed VMAR agents worldwide
Copyright VMAR Manufacturing and Richmond RC Supply Ltd 2002 # VMA-T240XIB
www.richmondrc.com
This model is covered with our ULTRA TOUGH POLYCOTE
ECS Enhanced Covering System.
TM
