Stage 16
Stage 17
13
FITTING THE FUEL TANK
To assemble the fuel tank you will need the following
items:
- The fuel tank and fuel stopper assembly (supplied)
- The clunk (supplied)
- About 7” (20 cm) of medium ID silicone fuel line (DUB
197 or similar)
- Cross head Philips screw driver
16.1 Use 100 mm (4 in) for fuel line
and 50 mm (2 in) for pressure line
16.2 Illustration of fuel line posi-
tioning inside the tank
16.3 Fuel tank installed on the
power module
100 mm (4 in) for fuel line
50 mm (2 in) for pressure line
fuel line
pressure line
fuel line
pressure line
INSTALLING THE ENGINE
The engine and the fuel tank are installed onto the
power module. First remove the power module from
the fuselage by removing the 4 nuts & washers
power module
17.3 Aluminum engine mount
17.2 Power module assembly
17.4 VMAX .46 2 cycle engine rec-
ommended
fuel tank
mouting dowels
Engine horizontal thrust line approximately
40 mm 1.56 in) from top of fuselage
17.1 Power module
17.6 Engine and fuel tank posi-
tioned on the power module
17.5 Fitting the engine to the
engine mount
17.7 Engine and engine mount
recommentded orientation
