Piper Products 1-CIDI, Specifications

Page: 2 / 26

D I S P E N S E R S D I S P E N S E R S
E L I T E 5 0 0 E L I T E 5 0 0
STEAM TABLES STEAM TABLES
SUPPORT EQUIPMENT SUPPORT EQUIPMENT
D R O P - I N S D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
SPEC
MODEL NUMBER
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
D-1
WithOUt DRaiN
2HFW-1
R R
3HFW-1
R R
4HFW-1
R R
5HFW-1
R R
6HFW-1
R R
With DRaiN
2HFW-1DM
R R
3HFW-1DM
R R
4HFW-1DM
R R
5HFW-1DM
R R
6HFW-1DM
R R
Piper’s HFW-1 Multiple Well Drop-ins add a dependable,
convenient and economical hot food unit to your counter
section. Designed to be used wet or dry, and installed into
all-metal counter fixtures. Multiple well units are available
with or without drains.
aSSEMBLY StRUCtURE
One-piece top-mounting flange is stainless steel with
R X
die-stamped openings in which the wells are mounted
Individual wells are 20-gauge stainless steel, one-
R X
piece, die-stamped construction
Locks are included on all sides to fasten unit into the
R X
countertop
Units are fully insulated for high heat transfer
R X
Drains are manifolded together and include fittings at
R X
each end for field attachment of the pipe cap and 3/4
NPT drain valve provided
Units are UL listed and meet the standards of NSF
R X
The recommended mounting procedure is to seal the
one-piece top-mounting flange to the countertop by
application of silicone NSF Standard 51 rated at 450 F
around the topmounting flange before mounting in place.
ELECtRiCaL
All units available in 208/240V - 1200W/1600W, single-
R X
phase or 3-phase. Specify voltage and phase needed.
Each well is individually controlled with an infinite control
R X
and high limit thermostat with indicator light
Models with the suffix “T” (example: 2HFW-1T) have
R X
thermostat controls in place of the infinite control and
high limit
Four, five and six-well units with thermostat controls
R X
require two control boxes
NOTE: Consult factory for part number and availability of
thermostat control units
aUtO WatER FiLL OPtiON
An optional automatic water fill is available on all units
R X
with drains and manifold
Auto-fill system allows the unit to maintain the proper
R X
water level in each well
A water level sensor is located in one well and a solenoid
R X
and water filter is located under the wrapper bottom
To add this option add the suffix “AF” (example: 2HFW-
R X
1AF) to the model number
NOTE: Consult factory for part number and availability of units
with auto-fill option
Multiple Well Hot Drop-Ins
90 Degree Turn Down Top with Locks
5HFW-1 Series shown
94