PRODUCT DESCRIPTION:
PowerCap
®
Lite powered air respirator with bump cap protection, 5.6
CFM powered air system.
• Gives a cooling, comfortable supply of filtered air at 5.6 cubic feet
per minute (CFM);
• Baseball style bump cap with protective liner is ideal for working
in confined spaces where there is a danger of bumping or
scraping the head;
• Lithium re-chargeable 8-hour batteries incorporated into
headpiece;
• Impact faceshield provides eye and face protection to protect
from flying particles.
Applications:
Ideal for use to protect the user from dust and most other airborne
particulate pollutants by providing the wearer with a continuous flow of
purified cooling air with zero breathing resistance.
POWERCAP
®
LITE POWERED RESPIRATOR
BARCODE #
BOX CASE
275-CAD602
5038428120388
5038428811187
TECHNICAL DATA:
Material:
Cap:
Cotton Twill with integral Lithium Ion battery and electrical fittings.
Visor:
1.00mm polycarbonate
Peak:
High Impact Polystyrene
Filter Housing:
High Impact Polystyrene
Impeller:
ABS (Acrylonitrile Butadiene Stryene)
Faceseal:
Foam with brushed nylon covering
Filters:
High efficiency sub-micron particulate filters with High Impact
Polystyrene front and back
Flow Test Unit:
High Impact Polystyrene with foam seal
Battery Life:
8 hour rechargeable / 8 hour charge time
Color:
Clear faceshield on black cap
Available Sizes:
One size fits most
Packaging:
1 per box;
6 per case
Case Dimensions: (
cm) - 58.4 x 43.2 x 33.0
(in) - 23 x 17 x 13
Case Weight:
36 lbs / 16.3 kg
Country of Origin/Harmonization Code:
UK/9020.00.6000
CONFORMITY:
• EN 12941:1998 as a Respiratory Protective Device.
• EN 812:1997 as an industrial bump cap
This document is the property of PIP and the information contained herein is proprietary to PIP.
DIMENSIONS:
Size available - One size
(cm) –
52–58
(inches)
20.5 - 22.75
(hat size) –
6
1/2
– 7
1/4
Weight:
1 lb / 0.44 kg
INSTRUCTIONS FOR USE:
The airflow of the unit should be checked prior to use. Fit cap on
head and fasten strap to ensure correct fit. For adequate respiratory
protection this cap must be worn with the peak facing forward and
adjusted to the size of the users head.
To remove saturated filters: Unscrew each filter. Remove all parts and
dispose of.
To fit new filters: Align the fittings on the filter with those on the fil-
ter housing. Push fit and tighten. PowerCap filters have a clockwise
thread.
The plastic parts can be cleaned with a damp cloth. Chemical or abra-
sive cleaners should not be used. The cover can be brushed clean.
Do Not immerse the unit in water. The unit should be stored out of
direct sunlight, away from chemicals and not exposed to extremes of
temperature.
Care must be taken to ensure that the correct respiratory protection
device is selected for the work to be carried out. If in doubt, seek
professional advice.
