XV-DV333
85
5
6
7
8
5
6
7
8
C
D
F
A
B
E
6
Connect the connector from front panel section.
8
Connect the two flexible cables for service.
9
Arrange the unit as shown in the photo below.
Front panel section
Diagnosis
Flexible cable for srvice
(GGD1266 or GGD1315 x2)
Lead wire
Lead wire
DSP holder
DSP holder
7
Connect the lead wire between the DSP holder (ground on the DSP Assy) and the rear panel (chassis).
Connect the lead wire between the audio signal GND and the rear panel (chassis).
Caution :
If the lead wire is not connected and the power is turned on, the timer indication on FL flashes on and off,
and the protect circuit (PRTCT ERR) has acted. a parts on the DSP Assy may be damaged.
If the above parts are damaged, the audio signal can not be output.
6
CN5611
CN5512
CN5511
8
CONTROL Assy
F
6CH AMP
D
TRADE2 Assy
E
VIDEO Assy
I
POWER Assy
J
DSP Assy
Audio signal GND
7
7
C
