XV-DV333
106
1
2
3
4
1
2
3
4
C
D
F
A
B
E
Note
• The 3-ringed SR+ cable from Pioneer is
commercially available under the part
number ADE7095. Contact the Pioneer
Customer Support division for more
information on obtaining an SR+ cable.
• You wonít be able to use the remote sensor
of this unit with the
CONTROL IN
jack of
this unit connected to the
CONTROL OUT
jack of your plasma display. You can use
the remote sensor of the plasma display
(even in standby) as long as the power isnít
switched off.
• The automatic volume muting feature is
enabled separately; see SR+ Setup
for Pioneer plasma displays
• If you disconnect the SR+ cable or switch
the plasma display off while SR+ is on, the
setting automatically reverts to
SR+ OFF
.
This displays an error if you switch the
input of the unit with the plasma display
switched off. Likewise, if this unit is sw
off, the link with the plasma display will
be terminated.
•
SR+ mini-plug cable
(ADE7095)
SERVICE PARTS
• Use a 3-ringed miniplug SR+ cable to
connect the CONTROL IN jack of this unit
through a media receiver to the CONTROL
OUT jack of your plasma display.2
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ Setup for Pioneer plasma displays
detailed instructions.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a
number of features (such as automatic video
input switching and volume muting3 on the
plasma display) become available to make
using this unit with your Pioneer plasma
display even easier.
See also SR+ Setup for Pioneer plasma displays
for information on setting up the
unit.
1
Make sure that the plasma display and
this unit are switched on and that they are
connected with an SR+ cable.
See Using this unit with a Pioneer plasma
display above for more on connecting these
components.
2
Press SR+ on the remote.
3
When you see 'Setup?' appear in the
display, use
|
/
\
to select ' SR+ On' or ' SR+
Off' .
•
If
SR+ Error
shows in the display, it means
there is a communication problem
between the unit and the plasma display.
4
Check all connections and retry.
Using this unit with a Pioneer
plasma display
If you have a Pioneer plasma display (models
PDP-504HDG and PDP-434HDG), you can use
an SR+ cable1 to connect it to this unit and
take advantage of various convenient features,
such as automatic video input switching of the
plasma display when the input is changed.
FM
UNBAL 75
AM
LOOP ANTENNA
OPTICAL IN
VIDEO
OUT
LINE 2
AUDIO
ANTENNA
CONTROL
S-VIDEO
OUT
COMPONENT
VIDEO OUT
P
R
P
B
Y
VIDEO
OUT
CONTROL
Pioneer plasma display
XV-DV535
Media receiver
