Connecting the Power Cord
When Using a Display Connected Rear Video Output
This product’s rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD or
Video CD while Driving.
• NEVER connect audio output (AUDIO OUT) to sold separately power amp.
STAND ALONE
IP BUS
Display with RCA
input jacks
RCA cable (supplied)
To audio inputs
To video input
White (audio output (Left))
Red (audio output (Right))
Yellow (rear video output)
Hide-away unit
6 m (19 ft. 8 in.)
9 cm (3-1/2 in.)
Not used.
This product
20 cm (7-7/8 in.)
25 pin cable (supplied)
Depending on where you install,
this cable is not used.
2.7 m (8 ft. 10 in.)
Black
Black
Connecting the Units
<ENGLISH>
Fuse resistor
Fuse resistor
Fuse holder
(4 A)
Black (ground)
To vehicle (metal) body.
Hide-away unit
Yello
Y
Y
w
To terminal always supplied with power
regardless of ignition switch position.
Orange/white
To lighting switch terminal.
Red
When using this product in STAND ALONE
mode, connect this cord to electric terminal
controlled by ignition switch (12 V DC) ON/OFF.
When using this product in IP BUS mode,
do not connect this cord.