51
XDJ-RX
5
6
7
8
5
6
7
8
A
B
C
D
E
F
Notes on Replacement of the Plate/DC1, Plate/MIX, and Plate/DC2
As the Plate/DC1 and Plate/DC2 are attached to the control panel with DS Tape, when those plates are to be replaced
replacement of DS Tape/DC1 and DS Tape/DC2 is also required.
In the same way, as the Plate/MIX is attached to the control panel with DS Tape, when this plate is to be replaced replacement
of DS Tape/MIX, DS Tape, and 3 pieces of Fader Packing is also required.
W
hen detaching the plates, take care not to damage the control panel.
Cleanly remove any residue of DS Tape and Fader Packing from the control panel then attach the pieces of new DS Tape and
Fader Packing to the control panel, as indicated in the figures below.
DS Tape/DC1: DEH1061
DS Tape/MIX: DEH1062
DS Tape: DEH1066
Fader Packing: DEC3355
DS Tape/DC2: DEH1063
W
hen attaching the plates, be careful not to attach them over the edge of the control panel or the Panel/L
V
L.
1) Attach DS Tape and 3 pieces of Fader Packing.
2) Place the DS Tape/MIX over them then attach it.
DECK 1 side
MIXER section
DECK 2 side
DS Tape/DC1
: DEH1061
DS Tape
: DEH1066
Panel/L
V
L
DS Tape/MIX
: DEH1062
Fader Packing
: DEC3355
DS Tape/DC2
: DEH1063