Disc playback
05
13
En
English
Français
Español
Deutsch
Italiano
Nederlands
Svenska
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
Programmed play (CD)
You can choose up to 24 selections for playback in the order
you like.
1
Whilst in the stop mode, press PGM/
MEMORY on the remote control to enter the
programming save mode.
2
Press
:
/
9
to select the desired
tracks.
3
Press ENTER to save track number.
4
Repeat steps 2 - 3 for other tracks. Up to 24
tracks can be programmed.
• If you want to check the programmed tracks, press
PGM/MEMORY
.
• If you make a mistake, the last programmed tracks will
be canceled by pressing
.
5
Press
1;
to start playback.
To cancel the programmed play mode:
To cancel the programmed play, press twice
∫
on the
remote control. The display will show “PRG CLR” and all the
programmed contents will be cleared.
Adding tracks to the program:
Press the
PGM/MEMORY
. Then follow steps 2 - 3 to add
tracks.
Note
• When a disc is ejected, the program is automatically
cancelled.
• If you press the
Í
to enter the standby mode or change
the function from
CD
to another, the programmed
selections will be cleared.
• During the program operation, random play is not
possible.
Switch the display contents
1
Press DISPLAY during playback.
If the title, artist and album name has been written to the file,
that information will be displayed. (The unit can only display
alphanumeric characters. Non- alphanumeric character are
displayed in the
“*”
.)
Note
• “Not supported playback file” can not be playback. In
this case, will be skipped automatically.
• There may be cases where no information can be
displayed.
• Displaying title, artist, and albums is only supported with
ID3 Version 1 (1.0 or 1.1).
Title display
Number of the track, title
display
Artist display
Album display
Number of the track in
a folder, playback time
display
Number of the track in a
folder, remaining time
display
