Pioneer X-HM72, Quick Start Manual

Page: 3 / 36

English
Français
Deutsch
Nederlands
Italiano
Español
3
En
L R
L
R
SPEAKERS
SUBWOOFER
PRE OUT
ANTENNA
AM
LOOP
FM
UNBAL
75
Ω
LINE 1 IN LINE 2 IN
IN
DIGITAL
OPTICAL
WLAN
ANTENNA
AC IN
LAN (10/100)
WLAN
ANTENNA
X-HM82D
XC-HM82D
X-HM72D
1
2
3
WLAN
ANTENNA
WLAN
ANTENNA
1
2
3
/100)
WLAN
ANTENNA
WLAN
ANTENNA
1
2
3
DAB/FM
ANTENNA
DAB/FM
ANTENNA
DIGITAL OUT
OPTICAL
WAN 3 2 1
LAN
Connecting the speakers
CAUTION
•
These speaker terminals carry
HAZARDOUS LIVE voltage. To prevent
the risk of electric shock when connecting
or disconnecting the speaker cables,
disconnect the power cord before touching
any uninsulated parts.
•
Make sure that all the bare speaker wire
is twisted together and inserted fully into
the speaker terminal. If any of the bare
speaker wire touches the back panel it
may cause the power to cut off as a safety
measure.
Be sure to complete all connections before connecting this receiver to the AC power
source.
Connecting a TV and playback component
L R
SPEAKERS
SUBWO
PRE O
1 2 3
Right speaker Left speaker
Make sure you connect the speaker on the
right to the right (R) terminal and the speaker
on the left to the left (L) terminal. Also make
sure the positive and negative (+/–) terminals
on the receiver match those on the speakers.
You can use speakers with a nominal
impedance between 4

and 16

.
Both speakers can be used on either the right or the left side.
10 mm
1. If not using the provided speaker wire, twist exposed
wire strands together.
2. Loosen terminal and insert exposed wire.
3. Tighten terminal.
Modem
To LAN
port
Internet
Router
Computer
Red tube
X-HM82, X-HM82D,
X-HM72 and X-HM72D
provided speaker wire
Supplied WLAN
antenna
Supplied WLAN
antenna
To AC outlet
Power cord
LAN cable (commercially
available)
AM loop antenna
FM wire antenna
DAB/FM wire antenna
Optical cable
(commercially
available)
TV