Using the tuner
08
31
En
• If no station can be found, “NOT FOUND” will appear for
4 seconds.
Information provided by RDS
Each time the
RDS
DISPLAY
is pressed, the display will switch
as follows:
When tuning in to a station other than an RDS station or to an
RDS station which sends weak signal, the display will change
in the following order:
Using the Auto Station Program
Memory (ASPM)
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40 stations
can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1
Press TUNER on the remote control.
2
Press and hold down RDS ASPM on the
remote control.
After “
ASPM
” has flashed for about 4 seconds, scanning will
start (87.5 MHz to 108 MHz).
After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then “END” will appear for 4
seconds.
To stop the ASPM operation before it is
complete:
Press
whilst it is scanning for stations. The stations which
are already stored in memory will be kept there.
Note
• If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
• Any station which has the same frequency as the one
stored in memory will not be stored.
• If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
• If no station have been stored in memory, “NOT FOUND”
will appear for about 4 seconds.
• If the RDS signals are very weak, station names may not
be stored in memory.
• The same station name can be stored in different
channels.
• In a certain area or during certain time periods, the
station names may temporarily be different.
Notes for RDS operation
If any of the following events occur, it does
not mean that the unit is faulty:
• “PS”, “NO PS” and a station name appear alternately,
and properly.
• If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
• When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
• “NO PS”, “NO PTY” or “NO RT” will flash for about 5
seconds, and then the frequency will be displayed.
Notes for radio text:
• The first 16 characters of the radio text will appear and
then they will scroll across the display.
• If you tune in to an RDS station which is not
broadcasting any radio text, “NO RT” will be displayed
when you switch to the radio text position.
• Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
STANDBY/ON
DVD/CD
USB
TUNER
AUDIO IN/LINE
TOP MENU
MENU/PBC
TUNE+
1
2
3
4
5
6
7
8
9
0
BT AUDIO CLOCK/TIMER
SLEEP
EQUALIZER
AUDIO
SUBTITLE
ANGLE
P.BASS
ZOOM
MEMORY
PROGRAM
BASS/TREBLE
ST/MONO VIDEO MODE
A-B
DISPLAY
CLEAR
RPT/RDM
OPEN/CLOSE
ASPM
PTY
DISPLAY
RDS
TOP MENU
MENU/PBC
HOME MENU
PRESET
VOLUME
SHIFT
+
MUTE
TUNE–
TUNE+
DIMMER
–
+
–
RETURN
ENTER
SCAN ENTER
DISPLAY
DAB
Station name (PS)
Programme type (PTY)
Frequency
Radio text (RT)
No RDS
FM 98.80 MHz
X-HM32VD_VXE8_En.book 31 ページ ２０１４年３月２８日 金曜日 午後２時１９分
