Listening to the FM radio
07
19
En
English
Français
Español
Chapter 7:
Listening to the FM radio
Tuning to an FM radio station
Note
• Make sure that you have connected and fully extended the
FM antenna.
1
Press FM on the remote control or INPUT
repeatedly on the main unit to switch the source
to tuner.
2
Press and hold
:
/
9
until the frequency
starts to change.
• To tune to a station at a specific frequency, press
:
/
9
repeatedly until the desired frequency is
displayed.
Programming radio stations
Note
• You can program up to 30 preset radio stations.
• To overwrite a programmed radio station, store another
one with its sequence number.
1
Tune to a radio station.
2
Press PROGRAM to activate programming.
[
XX
] (XX indicates the sequence number) blinks.
3
Press
/
to allocate a sequence number
from 1 to 30 to this radio station, and then press
PROGRAM to confirm.
The preset sequence number and the frequency of this radio
station are displayed.
4
Repeat steps 1-3 to program more stations.
Tip
• Press and holding
PROGRAM
will allow you to freely
select any radio station. The selected station will be saved
automatically.
Tuning to a preset radio station
• Press
/
to select the sequence number of that
preset radio station.
Display RDS information
RDS (Radio Data System) is a service that allows FM
stations to show additional information. If you tune to an RDS
radio station, [
RDS
] and the station name are displayed.
1
Tune to an RDS radio station.
2
Press DISPLAY repeatedly to scroll
through the available information:
• Station name
• Frequency
• Program type such as [
NEWS
] (news), [
SPORT
]
(sport), [
POP M
] (pop music)...
• Text messages
• CT (Clock Time)
X-EM22_SYXE8_En(NorthAmerica).book 19 ページ ２０１６年７月１３日 水曜日 午後３時３４分
