Pioneer VSX-S500-K Operating Instruction Download Page 28

Page: 28 / 56

Basic playback

Important

• Pioneer does not guarantee proper connection and

operation of this unit with all

Bluetooth

wireless

technology enabled devices.

Remote control operation

The remote control supplied with this unit allows you to play
and stop media, and perform other operations.

• It must be necessary that the

Bluetooth

wireless

technology enabled device supports AVRCP profiles.

• Remote control operations cannot be guaranteed for all

Bluetooth

wireless technology enabled devices.

Pairing the

Bluetooth

ADAPTER and

Bluetooth

wireless technology device

“Pairing” must be done before you start playback of

Bluetooth

wireless technology content using

Bluetooth

ADAPTER.

Make sure to perform pairing first time you operate the
system or any time pairing data is cleared. “Pairing” is the
step necessary to register

Bluetooth

wireless technology

device to enable

Bluetooth

communications. For more

details, see also the operating instructions of your

Bluetooth

wireless technology device.

• Pairing is required when you first use

Bluetooth

wireless

technology device and

Bluetooth

ADAPTER.

• To enable

Bluetooth

communication, pairing should be

done with both of your system and

Bluetooth

wireless

technology device.

• If the

Bluetooth

wireless technology device’s security

code is “0000”, there is no need to make the security code
setting on the receiver. Press

ADAPTER

to switch the

ADAPTER

input, then conduct the pairing operation on

the

Bluetooth

wireless technology device. If pairing is

successful, there is no need to performing the pairing
operation below.

• When using the AS-BT200 only: If the

Bluetooth

wireless

technology device supports SSP (Secure Simple Pairing),
there is no need to make the security code setting. Press

ADAPTER

to switch the

ADAPTER

input, then conduct

the pairing operation on the

Bluetooth

wireless

technology device. If pairing is successful, there is no
need to performing the pairing operation below.

Press TOP MENU.

Press ENTER to enter PAIRING.

Select the PIN code to be used from 0000/1234/8888

using

/

, then press ENTER.

PAIRING

blinks.

• You can use any of 0000/1234/8888 PIN codes.

Bluetooth

wireless technology device using any other PIN code
cannot be used with this system.

Switch on the

Bluetooth

wireless technology device

that you want to make pairing, place it near the system and
set it into the pairing mode.

Check to see that the

Bluetooth

ADAPTER is detected by

the

Bluetooth

wireless technology device.

When Bluetooth wireless technology device is connected:
Bluetooth

wireless technology device name appears in the

receiver display.

• The system can display alphanumeric characters only.

Other characters may not be displayed correctly.

When Bluetooth wireless technology device is not connected:

NO DEVICE

appears in the receiver display. In this case,

perform the connection operation from the side of the

Bluetooth

wireless technology device.

From the

Bluetooth

wireless technology device list,

select

Bluetooth

ADAPTER and enter the PIN code selected

in the step 4.

• PIN code may in some case be referred to as PASSKEY.

Listening to Music Contents of

Bluetooth

wireless

technology device with Your System

Press ADAPTER to switch the receiver to ADAPTER

input.

Perform the connection operation from the side of the

Bluetooth

wireless technology device to the

Bluetooth

ADAPTER.

• When the

Bluetooth

ADAPTER is not plugged into the

ADAPTER PORT

terminal,

NO ADAPTER

will be

displayed if

ADAPTER

input is selected.

Start playback of music contents stored in

Bluetooth

wireless technology device.

This receiver’s remote control buttons can be used for basic
playback of files stored on the

Bluetooth

wireless technology

device.

•

Bluetooth

wireless technology device should be

compatible with AVRCP profile.

• Depending on

Bluetooth

wireless technology device you

use, operation may differ from what is shown in the
remote control buttons.

The

Bluetooth

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by PIONEER CORPORATION is under license. Other
trademarks and trade names are those of their respective
owners.

PTY

PRESET

BAND

MUTE

TUNE

VSX-S500_SYXCN_En.book 28 ページ２０１１年５月２５日　水曜日　午後３時２１分

Summary of Contents for VSX-S500-K

























































Search results

Summary of Contents for VSX-S500-K

Reviews:

Related manuals for VSX-S500-K

Brands by name

Popular brands

Pioneer VSX-S500-K, Operating Instruction

Search results

Summary of Contents for VSX-S500-K

Reviews:

Related manuals for VSX-S500-K

Brands by name

Popular brands