VSX-LX70
3
5
6
7
8
5
6
7
8
C
D
F
A
B
E
[
I
mportant Check Points
f
or Good Servicing]
I
n this manual, procedures that must be per
f
ormed during repairs are marked with the below symbol.
Please be sure to con
f
irm and
f
ollow these procedures.
1. Product sa
f
ety
Please con
f
orm to product regulations (such as sa
f
ety and radiation regulations), and maintain a sa
f
e servicing environment by
f
ollowing the sa
f
ety instructions described in this manual.
1
Use speci
f
ied parts
f
or repair.
Use genuine parts. Be sure to use important parts
f
or sa
f
ety.
2
Do not per
f
orm modi
f
ications without proper instructions.
Please
f
ollow the speci
f
ied sa
f
ety methods when modi
f
ication(addition/change o
f
parts) is required due to inter
f
erences such as
radio/TV inter
f
erence and
f
oreign noise.
3
Make sure the soldering o
f
repaired locations is properly per
f
ormed.
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be
f
inished with the proper quantity. (Re
f
er to the example)
4
Make sure the screws are tightly
f
astened.
Please be sure that all screws are
f
astened, and that there are no loose screws.
5
Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imper
f
ect insertion.
6
Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state a
f
ter repairs.
I
n addition, be sure that there are no pinched wires, etc.
7
Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8
There should be no semi-broken wires, scratches, melting, etc. on the coating o
f
the power cord.
Damaged power cords may lead to
f
ire accidents, so please be sure that there are no damages.
If
you
f
ind a damaged power cord, please exchange it with a suitable one.
9
There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are
f
ound on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord i
f
necessary.
a
Sa
f
e environment should be secured during servicing.
When you per
f
orm repairs, please pay attention to static electricity,
f
urniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair sa
f
ely.
2. Adjustments
To keep the original per
f
ormance o
f
the products, optimum adjustments and con
f
irmation o
f
characteristics within speci
f
ication.
Adjustments should be per
f
ormed in accordance with the procedures/instructions described in this manual.
4. Cleaning
F
or parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be per
f
ormed to restore their per
f
ormances.
3. Lubricants, Glues, and Replacement parts
Use grease and adhesives that are equal to the speci
f
ied substance.
Make sure the proper amount is applied.
5. Shipping mode and Shipping screws
To protect products
f
rom damages or
f
ailures during transit, the shipping mode should be set or the shipping screws should be
installed be
f
ore shipment. Please be sure to
f
ollow this method especially i
f
it is speci
f
ied in this manual.
