Pioneer VSX-D608, Service Manual

Page: 59 / 62

59
VSX-D608
9
LOUDNESS indicator
Lights when loudness is on (refer to “Front Panel”
8
LOUDNESS).
0
DIRECT indicator
Lights when direct playback is on (refer to “Front Panel”
=
DIRECT).
-
Tuner indicators
STEREO : Lights when an FM stereo broadcast is
received in the auto stereo mode.
TUNED : Lights when a broadcast is received.
MONO : Lights when the tuner is set to receive FM
broadcasts in monaural.
=
H.P indicator
Lights when headphones are plugged in.
~
Speaker indicators
Light to indicate the current speaker system (refer to
“Front Panel”
7
SPEAKERS (A/B)).
SP
3
A : Lights when speaker system A is selected.
SP
3
B : Lights when speaker system B is selected.
!
Program format indicators
The following indicators light to show the channels being
played back.
L : Left front*
1 * 2 , C : Center* 1 , R : Right front* 1 * 2 ,
LS : Left surround* 1 ,S : Surround (mono)* 2 ,
RS : Right surround* 1
*1: Indicates 5.1ch Dolby Digital playback.
*2: Indicates Dolby surround playback.
@
LFE indicator
LFE (Low Frequency Effects) indicator lights to indicate
that the program source contains an LFE channel. The
indicator to the left of LFE lights during actual playback of
the LFE signals (LFE signals are not present in all parts
of the sound track).
#
Character display
$
Volume level display
Displays the volume level. Volume level is maintained
even when the power is off. ---dB indicates the minimum
level, and 0dB indicates the maximum level.
• Depending on the level settings for individual
channels, the MAX level can range between –10dB
and 0dB.
1
SIGNAL SELECT indicators
Light to indicate the type of input signal selected for the
current component (refer to “Front Panel”
@
SIGNAL
SELECT).
ANALOG : Lights when the analog audio signals are
selected.
DIGITAL : Lights when the digital audio signals are
selected.
AC-3 : Lights when a source with Dolby Digital signals is
played.
DTS : Lights when a source with DTS audio signals is
played.
2
Digital indicators
dts : Lights when DTS signals are input. ( /DTS mode
is ON)
PRO LOGIC : When the Dolby mode on the reciever is
on, this indicator lights during 2 channel playback of
Dolby Digital sources.
DIGITAL : When the Dolby mode on the reciever is on,
this indicator lights to indicate playback of a Dolby Digital
signal. However,
PRO LOGIC lights during 2 channel
playback of Dolby Digital.
3
SFC (DSP) mode indicator
Lights when the DSP mode or ADVANCED THEATER
mode (exept for 5-D THEATER) is selected.
4
ATT indicator
Lights when ATT (refer to “Remote Control”
7
Number
buttons) is used to reduce the level of the input signal.
(Available in ANALOG mode only)
5
Overload indicator
When “ANALOG” is selected in SIGNAL SELECT, this
indicator lights when an excessively strong signal is being
processed . When this indicator lights, press ATT on the
remote control to attenuate (lower) the signal and prevent
distortion.
6
5-D THEATER indicator
Lights when 5-D THEATER is selected.
7
MIDNIGHT indicator
Lights when the MIDNIGHT mode is on.
8
DNR indicator
Lights when the DIGITAL NR is on.
dB
SP
SIGNAL
SELECT
ANALOG
DIGITAL
AC-3
DTS
PRO LOGIC
AB
DIGITAL
L C R
RS S LS
LFE
SFC 5-D THEATER
ATT DNR MIDNIGHT LOUDNESS STEREO
H.P
MONO
TUNED
DIRECT
Display