Pioneer VSX-D511-K, Service Manual

Page: 76 / 78

VSX-D511-K
76
1 2 3 4
1 2 3 4
C
D
F
A
B
E
dB
SIGNAL
DIGITAL DIGITAL
ANALOG DTS
DIGITAL ATT RFATT EON DIRECT
Re-EQ MIDNIGHT
LOUDNESS MONO SP A B
STEREO TUNED RDS
MONITOR
Neo:6
PROLOGIC
ADV.SURR.
AUTO
1 10 2 3
4 5 6
7 8 9
11 15
13 12
14
16
Display
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the current
component:
AUTO
Lights when AUTO signal select is on
SB
Depending on the source, this lights when a signal with
surround back channel encoding is detected.
DIGITAL
Lights when a digital audio signal is detected.
DIGITAL
Lights when a Dolby Digital encoded signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded audio signals is
detected.
2 DTS
When the Standard mode of the receiver is on, this lights to indicate
decoding of a DTS signal.
3 DIGITAL
When the Standard mode of the receiver is on, this lights to indicate
decoding of a Dolby Digital signal.
4 PRO LOGIC II
When the Standard mode of the receiver is on, this lights to indicate
Pro Logic II decoding.
5 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of
the analog input signal.
6 DIRECT
Lights when source direct playback is in use. This function
bypasses all tone, balance, Advanced surround, and Dolby
Surround effects.
7
16 Speaker indicator
Shows if the speaker system is on or not.
SP
3
A means speakers are switched on. SP
3
means the head
phones are connected.
MIDNIGHT
Lights during Midnight listening.
8
9 RF ATT
Lights when the RF ATT is on .
10 EON and
‡
The
‡
indicator lights to inform you that the currently tuned
station carries the EON data service. When the EON mode
is set, the EON indicator lights, but during actual reception
of an EON broadcast the EON indicator will flash.
RDS: Lights when an RDS broadcast is received.
MONITOR
Lights when MONITOR is selected
11 Character display
12 ADV. SURR (Advanced Surround)
Lights when one of the Advanced Surround modes has been
selected.
13 LOUDNESS
Lights when LOUDNESS has been selected.
14 TUNER indicators
STEREO:
Lights when a stereo FM broadcast is being received in auto
stereo mode.
MONO:
Lights when the mono mode is set using the MPX button.
TUNED:
Lights when a broadcast is being received.
15 Master volume level
Shows the overall volume level. ---dB indicates the minimum level,
and
−
0 dB indicates the maximum level.
Depending on your level settings for each channel, the maximum
level can range between –10 dB and –0 dB.