Pioneer VSX-D509S, Service Manual

Page: 56 / 61

56
VSX-D509S
PHONES
MPX
MODE
MIDNIGHT
AUX VIDEO
BASS TREBLE
2
/DTS
SIGNAL
SELECT
1
R
N∫m
-
Û.?/∫
Digital Signal Processor
S-VIDEO VIDEO L AUDIO R
VIDEO INPUT
! @ & ^ ~ % # * $
1 2 3 4 5 6 7 8 9 0 - =
8.1 PANEL FACILITIES
8. PANEL FACILITIES AND SPECIFICATIONS
Front Panel
1
STANDBY indicator
Lights when the receiver is in standby mode (note that the
receiver consumes a small amount of power (1W) in
standby mode).
2
STANDBY/ON button
Switches the receiver between on and standby.(note that
the receiver consumes a small amount of power (1W) in
standby mode).
3
STATION (+/–), FREQUENCY (+/–), TUNING SELECT
buttons
STATION (+/–)
Selects station memories when using the tuner.
FREQUENCY (+/–)
Selects the frequency when using the tuner.
TUNING SELECT
Switches between station memory and frequency select
modes.
4
CLASS button
Switches between the three banks (classes) of station
memories.
5
MEMORY button
Press to memorize a station for recall using the STATION
(+/–) buttons.
6
MPX button
lf the TUNED or STEREO indicators don't light when tuning
to an FM station because the signal is weak, press the MPX
button to switch the receiver into mono reception mode.
This should improve the sound quality and allow you to
enjoy the broadcast.
7
Display
8
Remote sensor
Receives the signals from the remote control.
9
DSP MODE button
Use to switch between the various DSP modes available
(HALL1, HALL 2, JAZZ, DANCE, THEATER1, THEATER
2) and DSP off. Use to create different surround sound
effects from any stereo source.
0
2
/DTS button
Use to switch between the various Dolby/DTS surround
modes.
-
SIGNAL SELECT button
Use to select between an analog or digital signal.
=
MASTER VOLUME
Use to set the overall listening volume.
~
PHONES jack
Use to connect headphones but this does not switch the
speakers off.
!
SPEAKER button
Use to switch the speaker system A
=
B
=
A+B
=
off.
@
DIRECT button
Use to switch DIRECT playback on or off. This mode
bypasses the tone controls and channel levels for the most
accurate reproduction of a program source.
#
BASS (+/–) buttons
Use to increase/decrease bass (within a range of -6dB to
6dB in 2dB steps).
$
TREBLE (+/–) buttons
Use to increase/decrease treble (within a range of -6dB to
6dB in 2dB steps).
%
Function buttons
Use to select a source for playback or recording.
^
MIDNIGHT button
Use when listening to movie soundtracks at low volume.
This feature will enable you to hear quiet sounds and not
get jolted by loud or sudden sound effects.
&
MONITOR button
Press to switch tape monitoring on/off.
*
VIDEO INPUT jacks
Connect a video camera, video game system, etc. to the
VIDEO INPUT jacks.