Pioneer VSX-C100-S Operating Instructions Manual Download Page 44 | Manualshive

Page: 44 / 60

background image

44

En

09

Controlling the Rest of Your System

Changing the Remote Control Mode

The remote control that comes with this receiver is very flexible and can be switched from controlling this receiver to
controlling other components, even components not made by Pioneer. You can set up the remote to control so it will
be able to control everything in your system and thus you’ll only need to use this remote when operating your home
theater system.

The settings to control other components on this remote control are for Pioneer equipment but you can include most
other brand makers. You do this by inputting preset codes that have been decided for each brand maker into the
remote (see the next page). After these codes are input you’ll be able to operate the equipment.

For this remote, when you press an input button (like DVD) it also changes the remote control from controlling the
receiver to controlling DVD functions as well as switching the input to the receiver.

Switching the Operation Mode of the Remote

Press the button for the piece of equipment you want to control with this remote (for example DVD). Since the
buttons have different functions when operating different equipment pages 44 & 45 will give you detailed informa-
tion on what each button does in each operation mode.

Press the button of the component you want to use this remote to
operate. This will both change the input into the receiver and the
remote control operation mode.

The factory settings for all Input/Control Mode Select buttons are
explained here. All the settiings are all for Pioneer components but
you can change this.
DVD: DVD player
TV/SAT: TV
DVR/VCR: DVD recorder
FM/AM: the built-in radio tuner
FRONT: VCR
TV: TV
(For a detailed chart of the factory settings see “Clearing the Preset
Codes” on page 46)

• The TV CONTROL buttons are dedicated to controlling the TV. They will always control the TV no matter what

operation mode the remote is in. Of course, you need to input the preset code for your TV (if it is not Pioneer-
made) in order to control it with this remote. If, however, you input the code for a similar component (like a
satellite TV tuner) for a different button (like the TV/SAT button) the TV CONTROL buttons may take on the
controls of that component when in that mode (i.e. when you press the TV/SAT button the TV CONTROL buttons
might control your satellite TV tuner, not your TV).

Input/Control
Mode Select
buttons

Buttons for
controlling other
components

Dedicated TV
CONTROL buttons

Receiver Control
buttons

Buttons for
controlling other
components

SOURCE

RECEIVER

SLEEP

AUTO

SURROUND

SIGNAL SELECT

ADVANCED

SOUND

MODE

DIMMER

SETUP

DTV ON /OFF

CLASS

MPX

TV CONTROL

D.ACCESS

DTV INFO

CH RETURN

ENTER

TEST TONE

TOP MENU

DTV MENU

MENU

AUDIO

SUBTITLE

CHANNEL

CHANNEL

VOLUME

INPUT

SELECT

10

GUIDE

T.EDIT

DISPLAY

CH_SELECT

ROOM

SETUP

RECEIVER

MUTE

ST

TUNE

MASTER

VOLUME

ST

TUNE

DVD

ENTER

ENTER

DVR/ VCR

TV / SAT

F M / A M

FRONT

«
...
42
43
44
45
46
...
»

Summary of Contents for VSX-C100-S





























































Reviews:

No comments

Related manuals for VSX-C100-S

Brand: Yaesu Pages: 34

Brand: Yaesu Pages: 26

Brand: Yaesu Pages: 2

Brand: Yaesu Pages: 22

Brand: Yaesu Pages: 68

Brand: Takstar Pages: 24

Brand: Sansui Pages: 20

Brand: Yaesu Pages: 84

Brand: Yaesu Pages: 2

Brand: Yaesu Pages: 42

Brand: Yaesu Pages: 46

Brand: Yaesu Pages: 2

Brand: Yaesu Pages: 20

Brand: Yaesu Pages: 96

Brand: Yaesu Pages: 55

Brand: Yaesu Pages: 2

Brand: Yaesu Pages: 78

FT DX 9000 CONTEST - 2

Brand: Yaesu Pages: 410

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands