Pioneer VSX-AX3-K, Service Manual

Page: 180 / 189

VSX-AX5i-S
180
1 2 3 4
1 2 3 4
C
D
F
A
B
E
8.3 REAR PANEL
S400
S400
(AUDIO)
1 (AUDIO) - i.LINK connectors
4-pin, S400 i.LINK connectors for connection to
i.LINK-equipped players and other components.
Each i.LINK connector acts simultaneously as
both input and output.
2 CONTROL IN/OUT terminals
You can use these jacks to hook up other
PIONEER equipment, that has a CONTROL
terminal, so that you can control them all by
pointing the remote control(s) at one remote
sensor.
3 Radio antenna terminals
Hook up antennas for the radio tuner built into
the receiver here.
4 DIGITAL IN terminals
Use these terminals to input the signal from a
DVD, CD player or any other kind of digital player.
To be able to play Dolby Digital and other
surround soundtracks you need to make digital
connections. To do this use the digital terminals
here. If you don't connect as per the default
settings you need to complete
"Assigning the Digital Inputs" .
5 MONITOR OUT 1 & 2 terminals (connect
a TV or monitor here)
Use either of these terminals to output the video
signal to your TV(s), video projector(s) or
monitor(s). The on-screen displays to setup the
receiver will only be output through MONITOR
OUT 1.
6 DIGITAL OUT terminals
Use these terminals to output a digital signal to a
DVD-R, CD-R, MD recorder or any other kind of
digital recorder.
7 PRE OUT analog terminals (connect an
amplifier here)
Use these terminals to output the audio signal
from this amplifier to a different amplifier if that's
how you choose to set up your system.
All the terminals on the back panel are explained and/or referenced here.
7
VSX-AX5i-S