The System Setup menu
06
48
En
Tip
• You can change the channel levels at any
time by press
, then press
CH
SELECT
and
LEV +/–
on the remote control.
You can also press
CH SELECT
and use
/
to select the channel, and then use
/
to adjust the channel levels.
Speaker Distance
For good sound depth and separation from
your system, you need to specify the distance
of your speakers from the listening position.
The receiver can then add the proper delay
needed for effective surround sound.
1
Select ‘Speaker Distance’ from the
Manual SP Setup menu.
2
Adjust the distance of each speaker
using
/
.
You can adjust the distance of each speaker in
0.1 feet increments.
3
When you’re finished, press RETURN.
You return to the Manual SP Setup menu.
The Input Assign menu
You only need to make settings in the Input
Assign menu if you didn’t hook up your
equipment according to the default settings for
the component video inputs.
• Default settings:
Component 1
–
BD
Component 2
–
DVD
Important
• If you connect any source component to
the receiver using a component video
input, you should have your TV connected
to this receiver’s
COMPONENT VIDEO
OUT
or
HDMI OUT
output (down
converting component video is not
possible after assigning an input).
If you didn’t make component video
connections according to the defaults above,
you must assign the numbered input to the
component you’ve connected (or else you may
see the video signal of a different component).
For more on this, see
Using the com
p
onent
video jacks
on page 28.
1
Press
on the remote control,
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use
///
and
ENTER
on the remote
control to navigate through the screens and
select menu items. Press
RETURN
to confirm
and exit the current menu.
RECEIVER
2.Manual SP Setup
Return
a.Speaker Setting
b.Crossover Network
c.Channel Level
d.Speaker Distance
2d.Speaker Distance
Front L
Center
Front R
Surround R
Surr. Back R
Surr. Back L
Surround L
Subwoofer
Return
[ 10.0 ft ]
[ 10.0 tt ]
[ 10.0 ft ]
[ –––– ]
[ –––– ]
[ 10.0 ft ]
[ 10.0 ft ]
10.0 ft
RECEIVER
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
Return
VSX-920_UCSMXCN_En.book 48 ページ ２０１０年１月２１日 木曜日 午前９時４３分
