Other Settings
11
66
En
Note
• This setting works only with dual mono encoded
Dolby Digital and DTS soundtracks.
Tip
• While the receiver is in standby (using the front
panel), press the
STANDBY/ON
button while
holding down the
TUNER EDIT
button to change the
dual mono setting.
LFE Attenuator Setup
• Default setting:
ATT 0 dB
Some Dolby Digital and DTS audio sources include ultra-
low bass tones. Set the LFE attenuator as necessary to
prevent the ultra-low bass tones from distorting the
sound from the speakers.
1
Select ‘LFE ATT Setup’ from the Other Setup
menu.
2
Choose the setting that you want.
•
ATT 0dB
– No limiting (recommended setting)
•
ATT 10dB
– 10dB of limiting
•
LFE OFF
– No sound from LFE channel
3
When you're finished, press RETURN.
You will return to the Other Setup menu.
SR+ Setup for Pioneer plasma displays
Make the following settings if you have connected a
Pioneer plasma display to this receiver using an SR+
cable. Note that the number of function settings available
will depend on the plasma display you’ve connected.
See also
Using this receiver with a Pioneer plasma display
on page 60 and
Using the SR+ mode with a Pioneer
plasma display
on page 61.
1
Select ‘SR+ Setup’ from the Other Setup menu.
2
Select the ‘PDP Volume Control’ setting you
want.
•
OFF
– The receiver does not control the volume of the
plasma display
•
ON
– When the receiver is switched to one of the
inputs that use the plasma display (
DVD/LD
, or
another one of functions below), the volume on the
plasma display is muted so only sound from the
receiver is heard.
3
Assign any input source connected to the plasma
display to the corresponding input number.
This matches the receiver’s input source with a
numbered video input on the plasma display. For
example, assign
DVD/LD
to
input-2
if you have
connected the your DVD video output to video input 2 on
the plasma display.
• The
Monitor Out Connect
should be set to the input
that you’ve used to connect this receiver to your
plasma display.
4
When you're finished, press RETURN.
You will return to the Other Setup menu.
6. Other Setup
[
a. DRC Setup
]
[ b. Dual Mono Setup
]
[
c. LFE ATT Setup
]
[ d. SR+ Setup
]
[ e . Multi Room Setup
]
[ f . 12V Trigger Setup
]
6c. LFE ATT Setup
LFE ATT
[
ATT 0dB
]
6. Other Setup
[
a . DRC Setup
]
[ b . Dual Mono Setup
]
[ c . LFE ATT Setup
]
[
d . SR+ Setup
]
[ e . Multi Room Setup
]
[ f . 12V Trigger Setup
]
6d. SR+ Setup
PDP Volume Control
[
OFF
]
PDP Input Select
DVD/LD
[ input-3 ]
TV/SAT
[ TV ]
DVR
[ input-1 ]
VIDEO1
[ OFF ]
VIDEO2
[ OFF ]
Monitor Out Connect
[ input-2 ]
6d. SR+ Setup
PDP Volume Control
[ ON ]
PDP Input Select
DVD/LD
[
input-3
]
TV/SAT
[ TV ]
DVR
[ input-1 ]
VIDEO1
[ OFF ]
VIDEO2
[ OFF ]
Monitor Out Connect
[ input-2 ]
6d. SR+ Setup
PDP Volume Control
[ ON ]
PDP Input Select
DVD/LD
[
input-2
]
TV/SAT
[ TV ]
DVR
[ input-1 ]
VIDEO1
[ OFF ]
VIDEO2
[ OFF ]
Monitor Out Connect
[ input-2 ]
VSX_9100TX.book.fm 66 ページ ２００４年５月１９日 水曜日 午前９時５４分
