15
Connecting Your Equipment
PREP
ARA
TION
Before operating the receiver, be sure to press the main power
button on the front panel to turn the power ON (
_
).
First turn the receiver off (Standby mode), then press the
STANDBY/ON button while holding down the
SPEAKERS button.
Choose the impedance setting by pressing the SPEAKERS button again.
You can choose the 8
Ω
-16
Ω
setting or the 6
Ω
-less than 8
Ω
setting.
To check which impedance the amp is set to, hold down the
SPEAKERS button for 2-3 seconds. You will get a display like
the one shown below telling you the speaker impedance
setting.
7
Speaker terminals
1
Twist exposed wire
strands together.
2
Loosen speaker terminal
and insert exposed wire.
Speaker impedance
You can change the speaker impedance to suit the kind of speakers you have in your home system. We
recommend, however, using speakers with an impedance of 8
Ω
-16
Ω
(the default setting). If you are using 6
Ω
−
less than 8
Ω
impedance speakers, you need to change the impedance setting.
(This display indicates an 6
Ω
-less than
8
Ω
impedance setting)
(This display indicates an 8
Ω
-16
Ω
impedance setting.)
or
(This display indicates an 6
Ω
-less
than 8
Ω
impedance setting.)
10 mm
dB
SIGNAL
SELECT
ANALOG SP
A
VOLUME
dB
SIGNAL
SELECT
ANALOG SP
A
VOLUME
dB
SIGNAL
SELECT
ANALOG SP
A
VOLUME
STANDBY/ON
—
OFF
_
ON
DSP
MODE
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STEREO
PHONES
S-VIDEO
5-CHANNEL EQUAL POWER OUTPUT
VIDEO
EXTERNAL
DECODER IN
TAPE 2
MONITOR
DIRECT
LOUDNESS MIDNIGHT
DIGITAL
NR
CLASS
FM/
MEM
CHARACTER
/SEARCH
INPUT ATT
SPEAKERS
– TREBLE +
– BASS +
L AUDIO R
VIDEO INPUT
THX CINEMA
ADVANCED
STANDARD
/DTS
MPEG
RF ATT
SIGNAL
SELECT
SPEAKERS
Main power
button
STANDBY/ON
3
Tighten terminal.
