Controlling the rest of your system
09
46
En
Chapter 9:
Controlling the rest of your
system
Setting the remote to control
other components
Most components can be assigned to one of
the
MULTI CONTROL
buttons using the
component’s manufacturer preset code stored
in the remote.
However, please note that there are cases where
only certain functions may be controllable after
assigning the proper preset code, or the codes
for the manufacturer in the remote control will
not work for the model that you are using.
1
Note
• You can cancel or exit any of the steps by
pressing
RECEIVER
. To go back a step,
press
RETURN
.
• After one minute of inactivity, the remote
automatically exits the operation.
Selecting preset codes directly
1
While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks.
2
Press the MULTI CONTROL button for the
component you want to control.
The LED lights on continuously.
3
Use the number buttons to enter the
preset code.
You can find the preset codes on page 51.
The LED blinks again after you enter the code.
If the correct code has been input the power of
the component being input will turn on or off.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
• You can only input a code for the component
type written on each
MULTI CONTROL
button.
2
• Even if you don’t input a preset code for the
TV (
TV/SAT
MULTI CONTROL
button) you
will be able to control your TV using the
dedicated
TV CONTROL
on the remote if
you have assigned it to the
TV CTRL
button.
4
Repeat steps 2 through 3 to try a different
code, or to enter a code for another
component you want to control.
5
When you’re done, press RECEIVER.
Note
1 • TV codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the
TV/SAT
or
TV CTRL
button.
• If you assign the
FM
or
AM
function to another component, you will have to reassign it to the Pioneer preset code to use
this receiver’s built-in tuner.
SOURCE
MULTI CONTROL
RECEIVER
INPUT SELECT
DVD/LD
TV/SAT
CD
DVR/VCR
FM
AM
RECEIVER
TV CTRL
CD-R/TAPE
SIRIUS
XM RADIO
F.AUDIO
STANDARD ADV.SURR
STEREO/
F.S.SURR
AUTO SURR
TUNER DISP
CLASS
MPX
D.ACCESS
MIDNIGHT
ANALOG ATT
SIGNAL
SB ch
DIMMER
SLEEP
DISC
+10
INFO
TV CONTROL
ENTER
2 • TV codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the
TV/SAT
or
TV CTRL (+SHIFT)
button.
• You can’t assign the
AM
/
FM
or
RECEIVER
buttons.
09_controlling_system.fm 46 ページ ２００６年１２月１４日 木曜日 午前１０時１分
