Operation
17
Set up
Displays & Controls
Front Panel
1
#
$
(
*
@
&
%
^
2
3 4 5 6 7 8 9
0
- = ~
!
1
MAIN POWER button
Push to send electricity to the receiver. Note the
STANDBY/ON button below actually turns the
receiver on and standby.
2
STANDBY indicator
Lights when the receiver is in standby mode
(note that the receiver consumes a small amount
of power (1W) in standby mode).
3
STANDBY/ON button
Switches the receiver between on and standby.
4
STATION (+/–), FREQUENCY (+/–),
TUNING SELECT buttons (see p. 23–27)
STATION (+/–)
Selects station memories when using the tuner.
FREQUENCY (+/–)
Selects the frequency when using the tuner.
TUNING SELECT
Switches between station memory and
frequency select modes.
5
CLASS button (see p. 25-27)
Switches between the three banks (classes) of
station memories.
6
MEMORY button (see p. 25, 26, 29, 30)
Press to memorize a station for recall using the
STATION (+/–) buttons. Also use to search in
RDS mode
7
RF ATT button (see p. 23)
Use to lower the input level of a radio signal that
is too powerful or has interfering waves, thus
causing the receiver to distort
8
CHARACTER/SEARCH button(see
p.30)
Use this button to search for different program
types in RDS mode. It is also used to input
station names.
9
EON MODE button (see p. 31)
Use this button to search for different programs
that are transmitting traffic or news information
(this search method is called EON).
0
Display (see p. 18)
-
Remote sensor
Receives the signals fromthe remote control.
=
DSP MODE button (see p. 22)
Use to switch between the various DSP modes
available (
HALL, JAZZ, DANCE, THEATER1,
THEATER2
) and DSP off. Use to create different
surround sound effects from any stereo source.
~
DOLBY PRO LOGIC button (see p. 20)
Use to switch between the various Pro Logic
modes (PRO LOGIC, PRO LOGIC THEATER
1
,
PRO LOGIC THEATER
2
) and Pro Logic off.
!
MASTER VOLUME
Use to set the overall listening volume.
@
PHONES jack
Connect headphones for private listening .
#
SPEAKERS button
Use to switch the speaker system on or off.
$
FL DIMMER button
Use this button to make the fluorescent display
(FL) dimmer or brighter. There are three
brightness settings as well as an off setting.
%
BASS (+/–) buttons
Use to increase/decrease bass (within a range of
– 6dB to 6dB in 2dB steps). It cannot be used
when S.BASS is on.
^
TREBLE (+/–) buttons
Use to increase/decrease treble (within a range
of – 6dB to 6 dB in 2dB steps).
&
Function buttons
Use to select a source for playback or recording.
*
S.BASS button
Use to switch on and off the bass boost. Use for
a more powerful bass sound. Negates use of
BASS buttons.
(
DIRECT button
Use to switch DIRECT playback on or off. This
mode bypasses all tone controls, Dolby, DSP and
channel levels for the most accurate
reproduction of a program source.
