32
03
Connecting your equipment
Connecting optional
Bluetooth
ADAPTER
When the
Bluetooth
®
ADAPTER (AS-BT100 or AS-BT200) is connected to this receiver, a product equipped with
Bluetooth
wireless technology (portable cell phone, digital music player, etc.) can be used to listen to music
wirelessly.
!
The
Bluetooth
wireless technology enabled device must support A2DP profiles.
!
Pioneer does not guarantee proper connection and operation of this unit with all
Bluetooth
wireless technology
enabled devices.
!
The Air Jam function cannot be used with the AS-BT100.
(
OUTPUT 5 V
0.1 A MAX)
ADAPTER PORT
(
OUTPUT 5 V
0.1 A MAX
)
ADAPTER PORT
Bluetooth
® ADAPTER
Important
!
Do not move the receiver with the
Bluetooth
ADAPTER connected. Doing so could cause damage or faulty
contact.
%
Switch the receiver into standby and connect
Bluetooth
ADAPTER to the ADAPTER PORT.
!
For instructions on playing the
Bluetooth
wireless technology device, see
Pairing the Bluetooth ADAPTER and
Bluetooth wireless technology device
on
page 46
.
Connecting an iPod
This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.
MASTER
VOLUME
STANDBY/ON
INPUT
SELECTOR
iPod iPhone iPad
DIRECT CONTROL
ECO
ADVANCED
SURROUND
STANDARD
SURROUND
AUTO SURR/ALC/
STREAM DIRECT
PHONES
SPEAKERS
CONTROL – MULTI-ZONE – ON / OFF
BAND
TUNER EDIT
TUNE
PRESET
ENTER
iPod iPhone iPad
HDMI
ADVANCED
MCACC
FL OFF
MCACC
SETUP MIC
5V
2.1 A
with USB
HDMI 5 INPUT/
MHL (5V
0.9 A)
5V
2.1 A
with USB
HDMI 5 INPUT/
MHL (5V
0.9 A)
iPod/iPhone/iPad
USB cable included with the iPod
Tip
!
An iPod/iPhone/iPad can be connected to the receiver. For details on supported models and versions of the
respective products, see
Playing an iPod
on
page 42
.
%
Switch the receiver into standby, and then use the iPod cable to connect your iPod to the
iPod/iPhone/iPad terminal on the front panel of this receiver.
!
For the cable connection, also refer to the operating instructions for your iPod.
!
When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone is
kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this device.
!
iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the
unit’s power is turned on.)
!
For instructions on playing the iPod, see
Playing an iPod
on
page 42
.
Use a dedicated cable to enjoy iPod video
If an iPod is connected using a dedicated iPod connection cable (sold separately), then video from the iPod can
also be enjoyed on a TV that is connected to the receiver.
!
The iPod cable is not included with this receiver. The optional iPod cable from Pioneer is sold separately under
the part number L308102013030-IL.
Contact the Pioneer Customer Support division for more information on obtaining an optional iPod cable.
!
iPhone5, iPad 4th generation, iPad mini, iPod touch 5th generation and iPod nano 7th generation cannot be
connected using a separately sold iPod cable.
MASTER
VOLUME
STANDBY/ON
INPUT
SELECTOR
iPod iPhone iPad
DIRECT CONTROL
ECO
ADVANCED
SURROUND
STANDARD
SURROUND
AUTO SURR/ALC/
STREAM DIRECT
PHONES
SPEAKERS
CONTROL – MULTI-ZONE – ON / OFF
BAND
TUNER EDIT
TUNE
PRESET
ENTER
iPod iPhone iPad
HDMI
ADVANCED
MCACC
FL OFF
MCACC
SETUP MIC
5V
2.1 A
with USB
HDMI 5 INPUT/
MHL (5V
0.9 A)
5V
2.1 A
with USB
HDMI 5 INPUT/
MHL (5V
0.9 A)
iPod/iPhone/iPad
iPod cable
