VSX-816-K
139
5
6
7
8
5
6
7
8
C
D
F
A
B
E
Display
1 SIGNAL indicators
Lights to indicate the type of input signal:
AUTO
- Lights when
AUTO
signal select is on.
SB
- Depending on the source, this lights
when a signal with surround back channel
encoding is detected.
R
40 125 250 4K13K
L
[
]
SP
AB
1
2
3
4 5
6
7
11
8 9 10
12
16
15
17
18
13
14
19 20
21
DIGITAL
– Lights when a digital audio signal
is detected.
2
DIGITAL
– Lights when a Dolby Digital
encoded signal is detected.
ANALOG
– Lights when an analog signal is
detected.
DTS
– Lights when a source with DTS encoded
audio signals is detected.
2
When the
STANDARD
mode is on, this lights to
indicate decoding of a DTS multichannel signal.
3
2
DIGITAL
When the
STANDARD
mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital multichannel signal.
4
2
PRO LOGIC II
x
When the (
STANDARD
) Pro Logic II mode of
the receiver is on,
2
PRO LOGIC II
lights to
indicate Pro Logic II decoding.
2
PRO LOGIC
II
x
lights to indicate Pro Logic IIx decoding (see
Listening in surround sound ).
5 VIR.SB
Lights during Virtual surround back processing.
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.
7 AUTO SURR.
Lights when Auto Surround (see Auto playback)
or XM Surround is on.
8 ATT
Lights when
ANALOG ATT
is used to
attenuate (reduce) the level of the analog input
signal.
9 SLEEP
Lights when the sleep mode is active (see
Remote control below).
10 Tuner indicators
–
Lights when the mono mode is set
using the
MPX
button.
–
Lights when a stereo FM broadcast is
being received in auto stereo mode.
–
Lights when a broadcast is being received.
11 Speaker indicators
Lights to indicate the current speaker system,
A
and/or
B
.
12 Character display
13 Neo:6
When the (
STANDARD
) Neo:6 mode of the
receiver is on, this lights to indicate Neo:6
processing.
14 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
15 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro signal.
16 MIDNIGHT
Lights during Midnight listening.
17 D.E.
Lights when Dialog Enhancement (
DIALOG
E
)
is switched on.
18 LOUDNESS
Lights during Loudness listening .
19 EX
Lights when a Dolby Digital Surround EX encoded
signal is detected.
20 Master volume level
Shows the overall volume level.
21 MCACC channel EQ / Sound Retriever
indicators
These indicators show the EQ balance for each
channel in Checking your Acoustic Calibration
EQ settings. Also,
L
and
R
light when the Sound
Retriever is active.
VSX-816/KUXJ/CA
BETO-PX
